![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Jul 2008
Posts: 5
|
![]() I have a 90 or 91 ezgo with no reverse it goes forward just fine but when you switch to reverse and push the peddle you just here a little sound kind of like a whistle but it's a very low noise. when you switch it to reverse you can here the switch and everything click just like it does in forward. I am new at these electic cart so if you could help I would appreciate it alot. thanks
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Golf Cart Photographer
![]() Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
![]() The F/R switch needs to be cleaned up or repaired....... You can probably wiggle the F/R handle when in reverse and it will act like it wants to go for a second.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
Join Date: Jul 2008
Posts: 5
|
![]() thanks for replying I guess I can take it apart and clean it and all the connections and see if that works I'll try and see what happens thanks
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Jul 2008
Posts: 5
|
![]() anybody got any other advice?
|
![]() |
![]() |
![]() |
#5 |
steeplejack x
![]() ![]() Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
![]() Check the micro switch on the FNR. Make sure the reverse micro arm isn't rolled over and make sure control wires are good. You can bypass the micro.
As Rusty indicated, it may very well be the FNR itself. The cam/studs make not be making inside the FNR. just some more thoughts. Good luck. |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
![]() Had same problem on my 96 and it was the controller
|
![]() |
![]() |
![]() |
#7 |
Just me. .
![]() Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
![]() On a 90 or 91 single direction failures can not be the controller. F/R switch or motor is prob.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
EZGO runs in reverse, not forward | Gas EZGO | |||
98 EZGO No Reverse | Electric EZGO | |||
1991 EZGo Electric: Reverse Doesn't Work? | Electric EZGO | |||
80 electric ezgo with no reverse | Electric EZGO | |||
Mid 90 EZGO will reverse but not go forward | Electric EZGO |