![]() |
|
Big Block Talk! Everything about swapping a big block engine into your cart! |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Getting Wild
Join Date: Aug 2014
Location: Joliet, IL
Posts: 76
|
![]() I have a 18hp vanguard v twin and was wondering if the block was the same on the 12 and 14 but with a different bore. I found a bare block for a cheap price so I was thinking I'd get it bored and have a backup. Thanks
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
![]() Briggs doesn't make a horizontal 12hp Vanguard as far as I know. The blocks from 14hp to 20hp are the same as far as I can tell. The difference is with the stroke of the crank, and the bore. Some blocks have a cover that accomodates a double PTO bearing, but your cover should fit. The heads will interchange without modification. The 23hp heads will also fit the smaller motors, but a different intake manifold is required. For what it would cost to have the block bored, you could find a different motor with alot of extra parts.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
![]() they did make a 12.5 for a very short time it was a choked down 14
|
![]() |
![]() |
![]() |
#4 |
Getting Wild
Join Date: Aug 2014
Location: Joliet, IL
Posts: 76
|
![]() Sorry It's a 14 or 16 block. Anyone know how much boring costs?
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
![]() The 14/16 block can't be easily bored to accept an 18/20 piston. The steel cylinder sleeve does not have enough material to go that big.
|
![]() |
![]() |
![]() |
#6 |
Getting Wild
Join Date: Aug 2014
Location: Joliet, IL
Posts: 76
|
![]() Ok thanks that's all I needed to know.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Vanguard Big Block Burn | Videos | |||
Is this a good used motor for a Vanguard big block conversion kit? | Big Block Talk! | |||
WTB 16 HP Vanguard block | Golf Carts and Parts | |||
60HP+ Liquid Cooled Briggs & Stratton Vanguard Engine - Ultimate Big Block! | Golf Carts and Parts | |||
Differences? MCI block vs pre MCI | Gas EZGO |