lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-16-2021, 05:18 PM   #71
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Yet another random 3D modeling project. I had the choice between black and chrome center caps (went with chrome), but always wondered if maybe I should have done black and I absolutely hate the generic SS logos. Looks like I'll get my chance to try it out, with my logo of course. The orange inlays will be done on the vinyl cutter.

Since the hubs stick out further on the front than the rear, I did both heights although I think it'll look funny and ultimately will have 4 of the longer ones. Designing my own, I was able to reduce the height a little bit and took less than an hour start to finish.

Once I confirm physically fitment of them, I'll probably tinker with the styling a bit.

Building this cart, I've earned enough amazon points to pay for a chunk of an Creality Ender 3v2 (may end up with a 5) so everything will get reprinted in something other than PLA very soon.
Attached Images
File Type: jpg CG Logo - Front Center Cap.jpg (26.9 KB, 0 views)
File Type: jpg CG Logo - Rear Center Cap.jpg (36.2 KB, 0 views)
File Type: jpg CG Logo - Front-Rear Center Caps.jpg (46.3 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-17-2021, 12:28 AM   #72
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Progress.

Body is fully mounted with all 316SS allenhead bolts, zero rivets used. Brought them to the wire wheel to dress them up before installing, as well as the seat mounts.

Infinity Reference 6x8s wired and installed, with baffles and grills. Baffles are mainly to get a little more bass umph, but also to push them out slightly due to being so close to the batteries. 36v and 12v charging ports installed and wired.

Rear wheels mounted for kicks. Bumper isn't mounted yet, just laid on for pics.
Attached Images
File Type: jpg PXL_20210417_043819778~2.jpg (300.1 KB, 0 views)
File Type: jpg PXL_20210417_043838253~2.jpg (268.5 KB, 0 views)
File Type: jpg PXL_20210417_040403057~2.jpg (251.1 KB, 0 views)
File Type: jpg PXL_20210417_043732070~2.jpg (289.9 KB, 0 views)
File Type: jpg PXL_20210417_043716459~2.jpg (361.2 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-17-2021, 07:43 PM   #73
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

More progress. Should have more time to finish the new dash install this evening with everything mounted and plugged up. Then onto the bagwell area, installing rockers, headlights and taillights, etc.
Attached Images
File Type: jpg PXL_20210417_210313459~2.jpg (291.4 KB, 0 views)
File Type: jpg PXL_20210417_232658869~2.jpg (294.4 KB, 0 views)
File Type: jpg PXL_20210417_232747618~2.jpg (295.0 KB, 0 views)
File Type: jpg PXL_20210417_225847100.jpg (223.5 KB, 0 views)
File Type: jpg PXL_20210417_230131908.jpg (128.6 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-18-2021, 04:51 PM   #74
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Dash installed for the last time with it's new steering wheel. Chinese OMP replica of one I run in the SLC.
Attached Images
File Type: jpg PXL_20210418_210215200.jpg (285.4 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-18-2021, 10:32 PM   #75
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Let there be light. Super happy with my retrofit. Will actually be able to see down the road vs only 10ft in front of me...and not blind neighbors driving around since new lights have an actual cutoff.

Low beams. Still need to align them once cart is finished.
Attached Images
File Type: jpg PXL_20210419_023320333~3.jpg (253.5 KB, 0 views)
File Type: jpg PXL_20210419_022838312~2.jpg (291.7 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-18-2021, 10:36 PM   #76
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Daytime running lights
Attached Images
File Type: jpg PXL_20210419_022643498~2.jpg (280.5 KB, 0 views)
File Type: jpg PXL_20210419_023411830~2.jpg (89.5 KB, 0 views)
File Type: jpg PXL_20210419_023425956~2.jpg (135.5 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-18-2021, 10:58 PM   #77
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

All lights off. Definitely need to tint the tails ASAP when cart is finished.

My retrofitted lights don't have high beams and while my new low beams will far exceed the stock highs, I still want to use the output. As an alternative I have a skinny 24in light bar from my mower I sold that happens to fit perfectly on the square tubed axle. When I was soldering things this afternoon, went ahead and wired it in. When I lower the front shock mounts I weld the brackets for it.
Attached Images
File Type: jpg PXL_20210419_022921568~2.jpg (314.7 KB, 0 views)
File Type: jpg PXL_20210419_022947905~2.jpg (241.6 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-20-2021, 10:50 PM   #78
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Door sills didn't turn out as hoped so put a bandaid on it till I get some more stuff powdercoated.
Attached Images
File Type: jpg IMG_20210420_194925_776.jpg (190.7 KB, 0 views)
File Type: jpg PXL_20210421_032724272~2.jpg (354.5 KB, 0 views)
File Type: jpg PXL_20210421_032612808~2.jpg (374.5 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-22-2021, 11:07 PM   #79
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

This is exactly why I made the effort to retrofit real headlights instead of the crappy headlights that come with the kit.... Actually have useable light for when we are cruising the hood at night.

This is only my low beams and even better in person. My high beams will include a 24in low profile light bar which I hope to have done this weekend.
Attached Images
File Type: jpg PXL_20210423_020842961~2.jpg (204.8 KB, 0 views)
File Type: jpg PXL_20210423_020903421~2.jpg (238.6 KB, 0 views)
File Type: jpg PXL_20210423_020312246~2.jpg (320.6 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Old 04-22-2021, 11:14 PM   #80
InfiniteReality
Getting Wild
 
InfiniteReality's Avatar
E-Z-GO
 
Join Date: Nov 2020
Location: Louisiana
Posts: 149
Default Re: InfiniteReality's '99 Lowered EZGO TXT Build

Getting there. Lazy Life seat cover due in tomorrow, finally.
Attached Images
File Type: jpg PXL_20210423_024153563~2.jpg (310.9 KB, 0 views)
File Type: jpg PXL_20210423_024227746~2.jpg (294.9 KB, 0 views)
File Type: jpg PXL_20210422_224335046~2.jpg (282.1 KB, 0 views)
File Type: jpg PXL_20210422_224317697~2.jpg (250.3 KB, 0 views)
InfiniteReality is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
My lowered E-Z-GO build thread On Road Golf Carts!
lowered ezgo build On Road Golf Carts!
Lowered 97' EZGO TXT lithium 36v to 48v build On Road Golf Carts!
My lowered club car build On Road Golf Carts!
Here we go! Lowered Cart Build On Road Golf Carts!


All times are GMT -5. The time now is 07:16 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.