|
05-15-2025, 02:05 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2025
Posts: 1
|
2010 48v Star Classic high/low range mode stuck in high only
Hopefully this is something one of you can provide some insight into. My cart doesn’t seem to be switching to low range. I’ve confirmed that the switch is indeed sending voltage to the controller when toggled but the controller only runs in high range.
Any other item I should check that could keep the controller from using low range? I unfortunately don’t have a programmer interface for the controller so I can’t delve into that. Thanks in advance. God Bless |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-16-2025, 01:52 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,758
|
Re: 2010 48v Star Classic high/low range mode stuck in high only
What controller is in it?
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XCT High Throttle Input Under range | Electric Club Car | |||
| 2010 Star Classic- what model EZ GO parts interchange? | Star and Fairplay | |||
| Alltrax SR error flag, High Throttle Input Under-range | Electric Club Car | |||
| Ezgo high range issues | Gas EZGO | |||
| G9 Yamaha stuck in high | Electric Yamaha | |||
Linear Mode
