head torque specs

scooter24 · 02-10-2015, 08:14 PM

I need to replace the head gasket on a 1986 ezgo that has the Robin engine. Does anyone have the torque specs and bolt tightening sequence for the head bolts?

93yellowclubcar · 02-10-2015, 08:59 PM

Quote:

Originally Posted by scooter24

I need to replace the head gasket on a 1986 ezgo that has the Robin engine. Does anyone have the torque specs and bolt tightening sequence for the head bolts?

18 ft. lbs on the head bolts. Tighten any one bolt, then skip one and tighten the next one, then skip one and tighten the next one. You've just tightened down a triangle, now skip over to the opposite bolt from the last one you tightened and follow the same pattern as before on that triangle. Same pattern I always use on a six lug wheel.

Kerrville78028 · 02-11-2015, 09:41 AM

Here's a rough picture...
I start in the center and snug the headbolts in sequence first, then torque them to 12 ft lbs, then to 18 ft lbs.

02-10-2015, 08:14 PM	#1
scooter24 Not Yet Wild Join Date: Feb 2015 Posts: 4	head torque specs I need to replace the head gasket on a 1986 ezgo that has the Robin engine. Does anyone have the torque specs and bolt tightening sequence for the head bolts?
scooter24 Not Yet Wild Join Date: Feb 2015 Posts: 4

02-11-2015, 09:41 AM	#3
Kerrville78028 Gone Wild Join Date: Jan 2015 Location: Kerrville, Texas Posts: 162	Re: head torque specs Here's a rough picture... I start in the center and snug the headbolts in sequence first, then torque them to 12 ft lbs, then to 18 ft lbs.

Similar Threads
Thread	Forum
torque specs	Gas EZGO
Torque specs	Gas Club Car
g-8&9 gas torque specs	Gas Yamaha
head torque specs / sequence	Gas EZGO
92 Club Car head torque specs	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum