led

[digthis]

Have a 6 led 1350 lumens bar light I would like to hook it up to bottom front of golf cart, Just got a led wiring harness kit, I have a 2011 txt/pds cart I need to put this on, Anybody if they can in a nutshell where does what go to what? The kit has a toggle switch, and my cart is 12 volt system with tow run switch, Question : does this model have a voltage reducer already on it? TIA

[digthis]

Probably won't use toggle switch! Rather wire it directly to headlights so the light bar will come on when the headlights do.

[cgtech]

Just follow the wires from the factory headlights back to the point where one wire splits into the two for the individual headlight bulbs. Splice your light wires there.

Originally Posted by cgtech

Just follow the wires from the factory headlights back to the point where one wire splits into the two for the individual headlight bulbs. Splice your light wires there.

housings ??

[cgtech]

Originally Posted by crash test dummy

housings ??

Housings, Nah, the TXT uses one unit "lightbar" with 2 headlight bulbs, & 2 sets of wires that come together at a "feeder" junction.

[digthis]

I have a phoenix body with headlights instead of light bar

[cgtech]

Ok, if your light wires are 14ga or better, you should have no problem tapping into them, or better yet, hooking the leds up to the main light switch. Hook to the side that goes to the lights (switched side).