Cams for the G2-G14

raydhd · 01-29-2016, 09:34 AM

Some thing Sho mentioned a while back is that Tim Isky at small engine cams produces a high performance cam for these engines.Before my clone conversion that might have been something I would have added to my G14 had I known it existed.The title should have read cams for the G2-14 engine.Couldn't seem to edit the title.

Mr. Mike · 01-29-2016, 10:46 AM

Ray do you have a link to this?

raydhd · 01-29-2016, 11:03 AM

Not sure how to post it but it is" smallenginecams.com"

Dave in VA · 01-29-2016, 11:29 AM

http://smallenginecams.com/grinding

Plowmans has performance G16/G22 cams

raydhd · 01-29-2016, 11:44 AM

Quote:

Originally Posted by Dave in VA

http://smallenginecams.com/grinding

Plowmans has performance G16/G22 cams

For some reason he doesn't sell one for the earlier engines.The other interesting factor here ; the earlier engines have separate rod bearings where the later engines have the one piece rod/bearing unit generally considered less desirable for performance use.

raydhd · 01-29-2016, 01:42 PM

My head is buzzing here with the thought of a cammed ,carbed,and ported g14 engine.Has any built up a G2-14 engine with a performance cam,carb,and porting?I have not seen any threads that way but maybe I missed it.

cgtech · 01-29-2016, 02:46 PM

Hmm. Seems that just a regrind would also require longer pushrods?

Mike Mac · 01-29-2016, 10:01 PM

At one time Plowman ported the 285 head, don't know if he will still do it or not!!

lockman1 · 01-30-2016, 07:21 AM

Quote:

Originally Posted by raydhd

..G2-14 engine. Couldn't seem to edit the title.

raydhd · 01-30-2016, 09:55 AM

Thanks

01-29-2016, 09:34 AM	#1
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Cams for the G2-G14 Some thing Sho mentioned a while back is that Tim Isky at small engine cams produces a high performance cam for these engines.Before my clone conversion that might have been something I would have added to my G14 had I known it existed.The title should have read cams for the G2-14 engine.Couldn't seem to edit the title.

01-29-2016, 10:46 AM	#2
Mr. Mike It's Beer Time! Join Date: Sep 2010 Location: Vineland, NJ Posts: 1,462	re: Cams for the G2-G14 Ray do you have a link to this?

01-29-2016, 11:03 AM	#3
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	re: Cams for the G2-G14 Not sure how to post it but it is" smallenginecams.com"

01-29-2016, 11:29 AM	#4
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	re: Cams for the G2-G14 http://smallenginecams.com/grinding Plowmans has performance G16/G22 cams

01-29-2016, 01:42 PM	#6
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	re: Cams for the G2-G14 My head is buzzing here with the thought of a cammed ,carbed,and ported g14 engine.Has any built up a G2-14 engine with a performance cam,carb,and porting?I have not seen any threads that way but maybe I missed it.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-29-2016, 02:46 PM	#7
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	re: Cams for the G2-G14 Hmm. Seems that just a regrind would also require longer pushrods?

01-29-2016, 10:01 PM	#8
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	re: Cams for the G2-G14 At one time Plowman ported the 285 head, don't know if he will still do it or not!!

01-30-2016, 09:55 AM	#10
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: Cams for the G2-G14 Thanks

Similar Threads
Thread	Forum
Small engine cams	Big Block Talk!
Swapping cams out on f&r assembly.	Gas EZGO
Trail cams and Feeders	Hunting and Fishing Supplies
G14 Cams or Cam kits	Gas Yamaha
new yamaha perf cams	Gas Yamaha