|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-27-2016, 04:31 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
The cart can operate without the diode. Just be SURE you stop before touching the F&R lever (toggle). If you remove the diode and the cart continues to not run you may have a different problem.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-27-2016, 04:39 PM | #12 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Post a picture showing the solenoid and diode.
|
02-27-2016, 04:42 PM | #13 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
No sir I eased on the gas for a sec then gave it a little more gas then heard a loud pop. Opened the seat and noticed the diode had blown apart.
|
02-27-2016, 04:43 PM | #14 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Ok I will give me a few minutes it's down my dirt road a bit and I'm at the house.
|
02-27-2016, 04:44 PM | #15 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Ok I'll try to remove the diode too and see if it does anything
|
02-27-2016, 05:12 PM | #16 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Just removed what was left of the diode and that wasn't much. Not enough to even take a picture of. And the dang thing still doesn't do much the motor kinda jerks a little but that is it.
|
02-27-2016, 05:14 PM | #17 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
There is no fault codes or anything showing on the controller. It just has a green light
|
02-27-2016, 05:25 PM | #18 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Measure the voltage between the controller's B- and B+ terminals after the solenoid clicks.
Should be full pack voltage (38.2V). If not there is a solenoid contact or high current cable issue. The motor jerking could be caused by it trying to run off the energy stored in the filter capacitors. |
02-27-2016, 05:26 PM | #19 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
I took a picture of the solenoid but don't know how to put it on here
|
02-27-2016, 05:26 PM | #20 |
Not Yet Wild
Join Date: Mar 2014
Posts: 43
|
Re: just got my new xct 400 dcs controller from carts unlimited and need some help
Ok let me go get the meter
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Buggies Unlimited vs Everything carts | Electric Club Car | |||
Carts Unlimited & Ezgo | Announcements | |||
Thanks Carts Unlimited | Electric EZGO |