|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-11-2016, 10:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2015
Posts: 28
|
Question using rtv reassembling axles.
Hi guys, I don't post much but have had so many questions answered by searching thanks everyone for sharing.
I just finished rebuilding the rear axle on my 2003 EZGO Shuttle. New outer axle seals, bearings, retainers, full gear set and pumpkin. Question is do I need to use RTV to seal when reassembling? Thanks for the help. Pic attached. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-11-2016, 10:21 PM
|
#2 |
|
Not Yet Wild
Join Date: Dec 2015
Posts: 28
|
Re: Question using rtv reassembling axles.
...
|
|
|
|
|
05-11-2016, 10:25 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2015
Posts: 28
|
Re: Question using rtv reassembling axles.
|
|
|
|
|
05-12-2016, 09:27 AM
|
#4 |
|
Gone Wild
Join Date: Sep 2015
Posts: 572
|
Re: Question using rtv reassembling axles.
The shuttle has a different axle design from the smaller carts. On mine there is no reason to seal it there. But in your case, I would put a thin film of RTV.
|
|
|
|
|
05-12-2016, 10:00 PM
|
#5 |
|
Not Yet Wild
Join Date: Dec 2015
Posts: 28
|
Re: Question using rtv reassembling axles.
Yeah it has rubber seals further inside the housing, I guess a lil' smidge won't hurt. ;). Thank you.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| reassembling a HD clutch (was basket case) need order of parts | Gas Harley Davidson | |||
| ISO: Zuk axles | Autos/Side x Sides/ATVs/4x4's | |||
| Reassembling 1991 36V Club Car Getting Messy | Electric Club Car | |||
| Sugestions before reassembling FE350 | Gas Club Car | |||
| WTB: G9 axles | Golf Carts and Parts | |||
Linear Mode
