|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-16-2018, 12:59 PM | #21 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo Txt 48v won’t go
Quote:
In a stock series drive TXT, the black wire from the solenoid coil was connected to the B- terminal on the controller. With SR controller, the controller does it so it knows when the solenoid is supposed to be closed. I posted a schematic for a SR in a series drive TXT earlier in this thread. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2018, 01:04 PM | #22 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo Txt 48v won’t go
[emoji106]
Quote:
|
|
07-16-2018, 02:23 PM | #23 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
Ok, I have pack voltage going to the controller. Does the controller tell the solenoid to close the circuit? Because the solenoid doesn’t click. Sent from my iPhone using Tapatalk |
|
07-16-2018, 04:37 PM | #24 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo Txt 48v won’t go
Just for grins run the J1 black (solenoid negative) wire over to the controller B- and see if the solenoid works. If yes leave it there. Sometimes the J1 black can be quirky .
If no, a no click situation exits. determine if + or - is missing from the small posts when it should be clicking and we can go from there. |
07-16-2018, 05:48 PM | #25 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
Ok so I disconnected the J1 end, changed the end to a ring terminal, and mounted it to B-. The solenoid now clicks but the cart still doesn’t go anywhere. Sent from my iPhone using Tapatalk |
|
07-17-2018, 11:51 AM | #26 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
So what’s next? If your gonna tell me my controllers bad I’m gonna pull my hair out lol. Sent from my iPhone using Tapatalk |
|
07-17-2018, 11:55 AM | #27 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo Txt 48v won’t go
Quote:
There is a red wire from the solenoid's small terminal with the banded end of the diode on it that connects to the controller. Check for pack voltage on the controller's terminal this wire is connected to when solenoid clicks. If no pack voltage, fix the red wire. If there is pack voltage, the controller might be bad. (It is being told to power up and isn't doing so.) |
|
07-17-2018, 12:04 PM | #28 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
|
07-17-2018, 12:50 PM | #29 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo Txt 48v won’t go
Quote:
Technically, the problem might be the throttle, but in your first post you stated the LED wasn't lighting up and I suggested you connect a laptop to it, which powers up the controller via the USB port instead of voltage on the red wire that normally powers it up. That pretty much eliminates the throttle as the problem. Contact the vendor you got the controller from, or Alltrax, and get an RMA#. |
|
07-17-2018, 01:29 PM | #30 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
As I stated in post #13 in this thread I connected my laptop to the controller and powered it up, I got a sequence of 4 flashing green lights and that’s it. Without being connected to my laptop the green status light doesn’t come on. I bought all of my stuff thru ScottyB in Sept of last year. Sent from my iPhone using Tapatalk |
|