|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-25-2018, 01:03 PM | #1 |
Not Yet Wild
Join Date: Sep 2018
Posts: 20
|
EZ Go Lighting question
I am adding an LED light bar to my 36v. EZ Go. Unsure of the year.I want to say 94.
Question is, when I add the light bar,are there any considerations I have to make as far as a “voltage reduce” or can I just “grab “ 12v. From 2 batteries and be good to go? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-25-2018, 01:33 PM | #2 |
Gone Wild
Join Date: Mar 2009
Location: Brooksville, FL
Posts: 150
|
Re: EZ Go Lighting question
12volts from two batteries will work but will cause earlier break down of those 2 batteries.
A 36 volt to 12 volt converter is better. |
12-25-2018, 07:09 PM | #3 |
Gone Wild
Join Date: Feb 2018
Posts: 185
|
Re: EZ Go Lighting question
A reducer is the way to go. Otherwise 2 batteries will age faster than the others and not charge properly. Be sure you have enough amps in the reducer to power anything you might want to add on later.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Lighting question | Electric EZGO | |||
LED lighting question........ | Electric Club Car | |||
PDS lighting question | Electric EZGO | |||
BBB Lighting question | Electric golf carts | |||
Lighting question | Electric EZGO |