|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-03-2019, 10:06 AM | #11 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 97 EZGO TXT DCS won’t move after light install
Does this cart have a TOW/RUN switch on the controller cover??. And if the answer is yes. Did you flip it to TOW before you did any of the wiring. Are you sure it's a DCS cart? How many wires are coming out of the back side of the charge port on the cart?.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-03-2019, 10:17 AM | #12 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: 97 EZGO TXT DCS won’t move after light install
|
10-03-2019, 10:19 AM | #13 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 97 EZGO TXT DCS won’t move after light install
How many wires are coming out of the back side of the charge port on the cart?. Two or three?
|
10-03-2019, 10:29 AM | #14 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: 97 EZGO TXT DCS won’t move after light install
3 wires
|
10-03-2019, 10:58 AM | #15 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 97 EZGO TXT DCS won’t move after light install
Check to see if you have battery pack volts on the small red/white wire coming out of the charge port
|
10-03-2019, 12:28 PM | #16 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: 97 EZGO TXT DCS won’t move after light install
|
10-03-2019, 03:45 PM | #17 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 97 EZGO TXT DCS won’t move after light install
That's good.
Test the POS+ and the NEG_ post on the solenoid and see if it has both or which one is missing. Look at this and start testing. http://www.buggiesgonewild.com/elect...eshooting.html |
10-03-2019, 04:12 PM | #18 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: 97 EZGO TXT DCS won’t move after light install
I’ll begin going through the procedures over the weekend and will keep you posted. Thank you for your time
|
10-04-2019, 12:15 AM | #19 | |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,041
|
Re: 97 EZGO TXT DCS won’t move after light install
Quote:
Everything goes back to main (or battery) negative via a wire, NEVER via a chassis ground. |
|
10-06-2019, 08:34 PM | #20 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: 97 EZGO TXT DCS won’t move after light install
Throwing in the towel, taking it to my local golf cart guy. Not getting a 36V reading on any of the troubleshooting procedures.
|
Tags |
dcs, no clicking solenoid, wont move |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
LED Light Bar Install ?'s | Electric EZGO | |||
SW202 Install and now won't move | Electric Club Car | |||
EZGO deluxe light install and 3 way ignition issues | Electric EZGO | |||
LED light bar install | Lifted Golf Carts | |||
Light kit install | Gas Yamaha |