12-10-2020, 12:03 AM | #1 |
Not Yet Wild
Join Date: Jun 2014
Posts: 21
|
Carryall issues
I bought a 2000 Carryall at an auction a month or so back. The description said motor was pulled to do an oil seal never put back together but all parts are there. Well as I suspected all parts were not there but noting major was missing. So I ordered everything up and got the cart together. Went to run it and could not get it to go above and idle. Checked all kinds of thing. Cleaned the carb multiple times. Checked the Rev limiter even swapped it off my other cart no difference.
So tonight I pulled the motor. It's a FE350. Found out it has an ACR. Everything I read the key starts had those mine is a pedal start. Also I see no signs of a seal ever having been replaced. Machine came from a good course. Is it possible that this motor was from a different machine? Do I need the ACR or can I grind the rivets off and remove it? Any help would be great Sent from my moto z4 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
05 carryall 2 reverse issues | Electric Club Car | |||
05 carryall brake issues | Gas Club Car | |||
93 carryall-I drive issues | Gas Club Car | |||
VC460 in a Carryall Issues | Clone Engine Swaps | |||
Carryall IV clutch issues | Gas Club Car |