Accelerator Cable

Xtreme Cartz · 04-25-2010, 03:55 PM

Its been ages since I've worked on a gas EZGO as you are about to tell by this question

...how do you install the throttle cable in the pedal box on a late 90's workhorse? This cart I'm building didn't have one so I bought a replacement cable and I dont know how you get the nut through the hole going into the pedal box if the nut won't come off the cable?

Xtreme Cartz · 04-25-2010, 04:09 PM

Wait a minute..I got it. The hole was big enough to shove the nut through with some leverage and then I made washers so it wont come out. Not sure if that's the factory way but it worked.

scottyb · 04-25-2010, 04:20 PM

Sounds good to me

Is this something you're building or fixing or fixin' to build

Xtreme Cartz · 04-25-2010, 05:44 PM

Well it's actually that stretch limo I was telling you about a couple weeks ago. I finally got a day off to work on it. I held off explaining in the start of this thread what it is because I thought it might confuse somebody as to why I am trying to put a workhorse throttle cable in a ezgo limo and the engine is not factory nor is the rear end and at one time it was electric and not even a limo.

So much easier for me just to say; Help its a late 90's workhorse.

ruredy · 04-26-2010, 07:49 AM

Quote:

Originally Posted by Xtreme Cartz

I thought it might confuse somebody as to why I am trying to put a workhorse throttle cable in a ezgo limo and the engine is not factory nor is the rear end and at one time it was electric and not even a limo.

So much easier for me just to say; Help its a late 90's workhorse.

confused, no way. make perfect sense for here.

scottyb · 04-26-2010, 08:27 AM

O-I-C ........It's one of YOUR carts

04-25-2010, 03:55 PM	#1
Xtreme Cartz The Fabricator Join Date: Dec 2006 Posts: 2,016	Accelerator Cable Its been ages since I've worked on a gas EZGO as you are about to tell by this question ...how do you install the throttle cable in the pedal box on a late 90's workhorse? This cart I'm building didn't have one so I bought a replacement cable and I dont know how you get the nut through the hole going into the pedal box if the nut won't come off the cable?

04-25-2010, 04:09 PM	#2
Xtreme Cartz The Fabricator Join Date: Dec 2006 Posts: 2,016	Re: Accelerator Cable Wait a minute..I got it. The hole was big enough to shove the nut through with some leverage and then I made washers so it wont come out. Not sure if that's the factory way but it worked.

04-25-2010, 04:20 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: Accelerator Cable Sounds good to me Is this something you're building or fixing or fixin' to build

04-25-2010, 05:44 PM	#4
Xtreme Cartz The Fabricator Join Date: Dec 2006 Posts: 2,016	Re: Accelerator Cable Well it's actually that stretch limo I was telling you about a couple weeks ago. I finally got a day off to work on it. I held off explaining in the start of this thread what it is because I thought it might confuse somebody as to why I am trying to put a workhorse throttle cable in a ezgo limo and the engine is not factory nor is the rear end and at one time it was electric and not even a limo. So much easier for me just to say; Help its a late 90's workhorse.

04-26-2010, 08:27 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: Accelerator Cable O-I-C ........It's one of YOUR carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
accelerator pedal	Electric EZGO
1991 Par Car Accelerator cable	Gas Columbia ParCar
Sticking Accelerator	Electric Club Car
accelerator parts	Electric EZGO
How do I properly adjust accelerator cable?	Gas EZGO