|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-04-2012, 04:45 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Upstate NY
Posts: 167
|
G1 King Pin/Bushing Fit Question
I'm installing a 6" Jakes lift in my G1. Yesterday, I installed the new busings in the A-arms. When installing the new king pins, the fit is very tight. In order to push the king pin through the bushings, I will need to tap it pretty good with a hammer. Is this normal? Figured I'd ask before using the hammer. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2012, 06:19 PM | #2 |
Gone Wild
Join Date: Apr 2010
Location: Southern Arizona
Posts: 287
|
Re: G1 King Pin/Bushing Fit Question
I can't remember banging hard to get mine in......maybe freeze the pin and try it.
|
04-04-2012, 06:35 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Upstate NY
Posts: 167
|
Re: G1 King Pin/Bushing Fit Question
|
|
|
Similar Threads | ||||
Thread | Forum | |||
king pin bushing removal | Electric Club Car | |||
Bushing | Gas EZGO | |||
G1 king pins bushing | Gas Yamaha | |||
Bushing? | Electric Club Car | |||
club car bushing | Electric Club Car |