|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2013, 07:25 PM | #1 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
1994 jacobsen/workhorse 810 want pull a hill
newbie here! had this about a month and done alot of stuff working on this!main problem right now is it has no power to go up hill! it goes good on level ground but bogs down and almost stops and sumtimes does stop!im wanting it for hunting and to use in woods,so speed not a factor. just need to have more pulling power! THANKS FOR ANY HELP GIVEN RONALD ps already put new back clutch and belt
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2013, 10:26 AM | #2 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
Realy need sum help here I thought this was a help sight to go to
|
09-27-2013, 03:35 PM | #3 |
Gone Wild
Join Date: Feb 2013
Location: Plant City, FL
Posts: 2,212
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
Is this a gas or electric car?
|
09-27-2013, 05:22 PM | #4 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
Srry its gas thanks for a reply
|
09-27-2013, 07:54 PM | #5 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
|
09-27-2013, 09:14 PM | #6 |
Gone Wild
Join Date: Aug 2010
Location: Port Wentworth, GA
Posts: 247
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
Is everything stock or have you changed anything, Big Block for example? I would check the drive clutch, spark plugs, valves, air cleaner, engine compression, etc. Look at the easy to test parts first, could be as simple as the valves need to be adjusted, or spark plugs need changing. Make sure you are using good gas also, no water or old gas.
Can you give any more details as to what is going on when this happens and how steep the hill is? |
09-27-2013, 10:39 PM | #7 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
everything is stock,weve changed spark plugs ,oil ,gas filter,cleaned carb ,new air filter,new rear clutch,new belt,took off muffler and burned it out,new throttle cable. it does better than it did but rpms very low when trying to go up hill.On level ground it runs pretty fast enough. thanks for response ronald
|
09-27-2013, 10:40 PM | #8 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
also using 93 grade no ethenol gas
|
09-28-2013, 06:33 AM | #9 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
|
09-28-2013, 06:41 AM | #10 |
Not Yet Wild
Join Date: Sep 2013
Location: dobson nc
Posts: 9
|
Re: 1994 jacobsen/workhorse 810 want pull a hill
Not the gov.the bolts and skid plate were missing so we made a skid plate and reatached all of that .so when we did that I had to ajust thegas fead but it was doing the same thing ever since we got it
|
Tags |
1994, 810, jacobson |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G8-A trouble running - have to pull choke to get up a hill | Gas Yamaha | |||
95 ezgo workhorse slow up hill | Gas EZGO | |||
cart slower down hill than up hill | Gas EZGO |