|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-12-2010, 01:00 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Asheboro NC
Posts: 156
|
ALLTRAX install advise/suggestions needed
Installing my DCX500 alltrax in my PDS cart. I need advise on the Run/Tow switch. Where is a good place to mount it since the cover no longer fits. Making a bracket to mount it is no problem, but how would I water proof it? Having a water tight alltrax with an exposed Run/Tow switch doesn't sound right.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-12-2010, 02:51 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: ALLTRAX install advise/suggestions needed
Some guys cut the environmental cover in half. Install the top half with the run/tow switch mount and get a little extra protection for your controller terminals.
|
12-12-2010, 05:09 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Asheboro NC
Posts: 156
|
Re: ALLTRAX install advise/suggestions needed
I thought of that scottyb, but I'm looking for a cleaner install than that. And, dont really want to cover the led light.
Anyone else? |
12-12-2010, 06:51 PM | #4 |
Gone Wild
Join Date: Aug 2010
Location: brooksville fl
Posts: 412
|
Re: ALLTRAX install advise/suggestions needed
make a bracket mount it like they do on a shuttle
|
12-13-2010, 05:33 PM | #5 |
Gone Wild
Join Date: Oct 2010
Location: Asheboro NC
Posts: 156
|
Re: ALLTRAX install advise/suggestions needed
OK after thinking about this all night, This is the fix I came up with. 1 1/4 Alum tube. Cut one side until the switch will fit in. Drill hole through other side for switch toggle.
I engraved Run and Tow on mine I used furniture caps for the ends for waterproofing. I installed the assembly under the body lip just above the Alltrax That should fix my concerns on this. Now the heavy duty solenoid doesn't fit the mount spacing on the Alltrax..........another bracket comming up. |
12-13-2010, 05:57 PM | #6 | |
Gone Wild
Join Date: Sep 2010
Location: Mia, Fl.
Posts: 424
|
Re: ALLTRAX install advise/suggestions needed
Quote:
|
|
01-21-2011, 10:40 AM | #7 |
Not Yet Wild
Join Date: Dec 2010
Location: murrells inlet sc
Posts: 58
|
Re: ALLTRAX install advise/suggestions needed
kc looks good bud
|
01-24-2011, 03:28 AM | #8 |
Gone Wild
Join Date: Jan 2011
Location: Murray KY
Posts: 219
|
Re: ALLTRAX install advise/suggestions needed
2X on it looking good. Nice machining.
|
01-24-2011, 12:19 PM | #9 |
Gone Wild
Join Date: Oct 2010
Location: Asheboro NC
Posts: 156
|
Re: ALLTRAX install advise/suggestions needed
|
01-24-2011, 08:40 PM | #10 | |
Gone Wild
Join Date: Jan 2011
Location: Murray KY
Posts: 219
|
Re: ALLTRAX install advise/suggestions needed
Quote:
We are excited about getting our first fun machine. The kids wanted an ATV but dad can not get on one due to arthritis so I went with something I can ride and with the stock drive line I know they are not going over 13 MPH. Since they will be driving in 3 years solo I wanted them to have more car like controls too. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1990 ezgo rebuild. Advise needed! | Gas EZGO | |||
Battery readings - advise needed | Electric Club Car | |||
Alltrax DCX400 install | Electric EZGO | |||
Alltrax 4844AXE install | Electric EZGO | |||
Battery cables advise needed | Electric Club Car |