Precedent Light wiring-confused about blue wire

[Stevegrmich]

Originally Posted by dbradley

I don't have a picture right now but it is a "plug and go" system for Precedent from East Coast Carts. I removed the dash, connected the 12 pin connectors on the converter between the bucket harness and the head light harness and reinstalled, there is no 12V output coming from it, it is sealed. I went and looked back at instructions per Zackman and it appears that once converter is installed, you connect the blue wire to the positive on #6...but I have 48V there. Still lost and confused

. . . being that you have been toying with this for a couple days, I would call East Coast Carts before I hooked it up wrong . . can only guess so many times before you break it . . .

877-340-3606

[jantrree]

Originally Posted by dbradley

I don't have a picture right now but it is a "plug and go" system for Precedent from East Coast Carts. I removed the dash, connected the 12 pin connectors on the converter between the bucket harness and the head light harness and reinstalled, there is no 12V output coming from it, it is sealed. I went and looked back at instructions per Zackman and it appears that once converter is installed, you connect the blue wire to the positive on #6...but I have 48V there. Still lost and confused

If the converter is plug and play, then you probably don't have 12v in and out. They are part of the 12 pin harness. This sounds very similar to my 48v-12v plug and play Club Car OEM converter. My blue wire hooks to positive terminal on battery number 1. That is where the main red cable attaches which comes from rear of cart. I agree call east coast carts, but my money is on hooking it up On No.1 positive terminal. That is your first battery where the main red cable attaches to your pack from the rear of the battery box. The 12v in and out connections to your lights are in the 12 pin harness which is already hooked up.

[dbradley]

Thanks Steve and Jantrree. will let you know results this afternoon