03-29-2013, 12:07 PM | #1 |
Gone Wild
Join Date: Mar 2009
Location: Raleigh NC & Bracey VA
Posts: 156
|
Dead Club Car
I am working on a Club Car AC0131. I have seen several wiring diagrams, but none show what I have. It has an MCOR, GE Controller which has a 23-pin input control. I have replaced the Controller, OBC, MCOR and the batteries are all brand new and charged. The solenoid will not activate. by isolating the solinoid, I have tested it and it is working correctly. I have tested the key switch and tow switch and both are good. Does any body have a diagram for this 2001 with a MCOR and GE controller. These are all factory stock, and I cannot figure ou why there is no diagram for this configuration,
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-29-2013, 12:13 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Dead Club Car
|
03-29-2013, 12:19 PM | #3 |
Gone Wild
Join Date: Mar 2009
Location: Raleigh NC & Bracey VA
Posts: 156
|
Re: Dead Club Car
NOPE. That has the old V-glide, not an MCOR, and the controller is not a GE.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Car DS dead after being used to tow | Electric Club Car | |||
93 Club car ..Dead!! | Electric Club Car | |||
club car dead | Electric Club Car | |||
dead club car | Electric Club Car | |||
98 club car dead | Electric Club Car |