|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-23-2017, 06:45 AM | #11 |
Not Yet Wild
Join Date: Dec 2013
Posts: 12
|
Re: Curtis 1268 solenoid issue
Well I replaced the relay and having the same issue. Solenoid clicks but cart won't move. I just purchased a 1313-4431 programmer (shipping from China) so is there a way to disable the walkway circuit? Any self testa I can do on the controller itself?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2017, 06:46 AM | #12 |
Not Yet Wild
Join Date: Dec 2013
Posts: 12
|
Re: Curtis 1268 solenoid issue
Well I just saw the last post so I'll give it a try when the handset show up.
|
10-25-2017, 01:13 PM | #13 |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: Curtis 1268 solenoid issue
As long as aux driver mode is set to 0 it doesn't care about the holding and pull-in values or the state of pin 3 or the presence of a coil on 9 and 23. So if that truly is your issue that change should "fix" the problem.
|
11-20-2017, 05:18 PM | #14 |
Not Yet Wild
Join Date: Dec 2013
Posts: 12
|
Re: Curtis 1268 solenoid issue
Update, I turned off the walk away feature and still same result. New solenoid also. It clicks but no go. Getting low battery code and main dropout code. Have 50 volts to pin 4. Is my controller shot?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Curtis 1268 - HPD Fault | Electric Club Car | |||
Curtis 1268-5403 | Electric golf carts | |||
Curtis 1268 Controller | Electric Club Car | |||
Curtis 1268 problem | Lifted Golf Carts | |||
Curtis 1268 400 amp controller? | Golf Carts and Parts |