2017 precedent, I hate myself

[Mooncarter]

Originally Posted by NoleFan4Ever

In all honesty, someone abused it or had some faulty equipment. Those bearings should have lasted a long time, and definitely more than 2-3 years. I have sealed and open bearings that have been in service for many many years. j/s, that is a good cart so hopefully you will get the bugs out.

I was going to say something similar. Rarely do I have any of these problems with a DS. Even 20-30 years older than that cart.

[MCJEFE]

Originally Posted by TahoeDawgZ71

Got a whole pile of them. There's no reason for any of you guys on this forum to buy "new" Precedent front end parts for years to come.

I wish you'd start messing with RXV's. ;)

Sent from my SM-G960U using Tapatalk

[TahoeDawgZ71]

Originally Posted by MCJEFE

I wish you'd start messing with RXV's. ;)

Sent from my SM-G960U using Tapatalk

Sorry man. Lol. I don’t see that in my future.


Sent from my iPhone using Tapatalk

[Fairtax4me]

Originally Posted by Livnpaintball

Will give a thorough look over, also found slop in the king pin so I ordered a new set of those.

Let’s recap, so far on my 2017 I have bought new batteries, new cables AND complete wire harness, new solenoid, Alltrax 48500, bearings, bushings, king pins, MCOR. Guess the motor will be next.. WTF...

King pins will have a bit of play thats normal. The king pins are greasable and most of the time that’s all they need.
If you replace the bronze bushings they must be reamed to size after installing because they are an interference press fit. Majority of the time they’re not worth the effort unless they’re Really bad.

[Livnpaintball]

Originally Posted by Fairtax4me

King pins will have a bit of play thats normal. The king pins are greasable and most of the time that’s all they need.
If you replace the bronze bushings they must be reamed to size after installing because they are an interference press fit. Majority of the time they’re not worth the effort unless they’re Really bad.

Advice taken, I’m going to do a lift soon.

[WalterM6]

Let’s recap, so far on my 2017 I have bought new batteries, new cables AND complete wire harness, new solenoid, Alltrax 48500, bearings, bushings, king pins, MCOR. Guess the motor will be next.. WTF...

Sort of what I did with my cart. It seems I've jacked up the roof and put another cart underneath it.