lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-11-2010, 12:30 PM   #1
stormwatcher
Not Yet Wild
 
Join Date: Feb 2010
Posts: 5
Default Power Wise+, parts help, needed

My charger quit working. I jumpered around the breaker on the on/off sensor board, part # 28126-GO 4, and the charger worked. I removed the board, and it looks like a resistor is bad [burnt]. Maybe breaker also.

Does any one know what the value of this resistor is, or the bands colors are.
The resistor is the R1 on the board. I can't tell what the colors on mine are or were.

I would like to try and fix this one before I buy another board or charger.
Also what is the part # for the breaker.

Thanks all
Earl



stormwatcher is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-11-2010, 12:35 PM   #2
mikesmotortoys
Gone Wild
 
mikesmotortoys's Avatar
E-Z-GO
 
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
Default Re: Power Wise+, parts help, needed

I've never tried to repair the boards - we replace them...

Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers
mikesmotortoys is offline   Reply With Quote
Old 02-11-2010, 08:08 PM   #3
hitmanharleyk
Gone Wild
E-Z-GO
 
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
Default Re: Power Wise+, parts help, needed

Buy a board, had the same issue a few months back and I ended up doing the same thing. Looked but never could find anyone who had the parts or would repair mine.
hitmanharleyk is offline   Reply With Quote
Old 02-12-2010, 02:20 PM   #4
Wynelocked
Gone Wild
 
Wynelocked's Avatar
Club Car
 
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
Default Re: Power Wise+, parts help, needed

Why cant you just look at a picture of a new board...check out the risister colors...write them down.Then just go to RadioShack an buy one?
Wynelocked is offline   Reply With Quote
Old 02-12-2010, 02:21 PM   #5
Wynelocked
Gone Wild
 
Wynelocked's Avatar
Club Car
 
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
Default Re: Power Wise+, parts help, needed

Quote:
Originally Posted by mikesmotortoys View Post
I've never tried to repair the boards - we replace them...
But isnt that possible Mike?Especially with an obvious burnt risister.
Wynelocked is offline   Reply With Quote
Old 02-12-2010, 10:23 PM   #6
hitmanharleyk
Gone Wild
E-Z-GO
 
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
Default Re: Power Wise+, parts help, needed

Quote:
Originally Posted by Wynelocked View Post
But isnt that possible Mike?Especially with an obvious burnt risister.
I would figure that the resistor burnt because of another problem like a stuck contact switch or whatever it is called. Something made it get hot !

Buy the time you chased down, located the parts and replaced all of the possible problems, you'd be better off just replacing the board.
hitmanharleyk is offline   Reply With Quote
Old 02-13-2010, 09:41 AM   #7
stormwatcher
Not Yet Wild
 
Join Date: Feb 2010
Posts: 5
Default Re: Power Wise+, parts help, needed

thanks guys, I know that I will probably buy a new board, but I would like to see if I could fix this one, just to see if it can be done.
The relay could also be bad, and if I could find one of them, I will replace it also.

Again, Thanks
Earl
stormwatcher is offline   Reply With Quote
Old 02-13-2010, 09:50 AM   #8
GUNNY
Getting Wild
 
Join Date: Jan 2010
Posts: 122
Default Re: Power Wise+, parts help, needed

I would bring it down to radio shack, they use to have a color wheel pocket guide for resistors, was like $1.00, they are the quickest to fix, easy.



Gunny
GUNNY is offline   Reply With Quote
Old 02-13-2010, 10:29 PM   #9
Wynelocked
Gone Wild
 
Wynelocked's Avatar
Club Car
 
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
Default Re: Power Wise+, parts help, needed

Quote:
Originally Posted by hitmanharleyk View Post
I would figure that the resistor burnt because of another problem like a stuck contact switch or whatever it is called. Something made it get hot !

Buy the time you chased down, located the parts and replaced all of the possible problems, you'd be better off just replacing the board.
But if it burnt because of a problem...not board related...you're back in the same boat.
Wynelocked is offline   Reply With Quote
Old 03-21-2010, 01:44 PM   #10
stormwatcher
Not Yet Wild
 
Join Date: Feb 2010
Posts: 5
Default Re: Power Wise+, parts help, needed

OK, I ordered a new board, and it should be here any day now. I found one for $49.95 Suppose to be new.

Thanks everyone
Earl
stormwatcher is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
power wise charger Electric EZGO
Power Wise Charger's Golf Carts and Parts
Power Wise Parts Electric EZGO
Power Wise charger Electric EZGO
power wise QE charger Electric golf carts


All times are GMT -5. The time now is 06:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.