|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-16-2010, 06:41 PM | #1 |
Not Yet Wild
Join Date: Feb 2010
Location: Jackson MS
Posts: 54
|
DCX400 3 red
Just installed new alltrax DCX400. At start up I'm Getting 4 Green, then 3 red. I know this is - HPD. Throttle hasn't gone to zero during this power on cycle. But what does that mean? I'll be checking back on the thread at 10:30
99 EZGO DCS. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2010, 10:35 PM | #2 |
Not Yet Wild
Join Date: Feb 2010
Location: Jackson MS
Posts: 54
|
Re: DCX400 3 red
Somebody must know what this is. I have not touched the solenoid yet.
|
03-17-2010, 01:39 PM | #3 |
Not Yet Wild
Join Date: Feb 2010
Location: Jackson MS
Posts: 54
|
Re: DCX400 3 red
I Called Alltrax. THey told me it was either the controller being to sensitive for this ITS or that I could turn of the HTP. They also gave me the readings I should get at the B- and Pin 1. All reading were great. After a false start on finding the ITS(I thought it was accessible from under neath) I opened it up and could while the pedal was at rest hit the green reset button and everything would work Great. Yet , when I'd turn key off I was back at square 1. I left for a bit and realized while gone there appeared to be a piece of metal in the ITS box. It was the roller that is attached to the side of the micro switch and engages the plunger had brokenoff and is not reattachable.
THe real question now is can I just buy the small Micro Switch? |
03-17-2010, 03:28 PM | #4 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: DCX400 3 red
Yes. Check with any site sponsor.
|
03-17-2010, 07:28 PM | #5 |
Not Yet Wild
Join Date: Feb 2010
Location: Jackson MS
Posts: 54
|
Re: DCX400 3 red
To anxious to wait for the mail delivery so I bought one at local EZGO. The reason it broke was the whoever adjusted it previously had the plunger going back behind the roller then coming forward and breaking it off. Its now working great. The DCS with a 400 Alltrax runs considerably faster than before. Also after fixing the MicroSwitch I now have regen braking. Wow what a difference. We ought to listen to the sponsors!
|
03-17-2010, 08:01 PM | #6 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: DCX400 3 red
Glad you got it up and running!!!
|
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax DCX400 PDS Installed On 06 TXT PDS | Electric EZGO | |||
PDS cart with Alltrax DCX400 | Electric EZGO | |||
Alltra dcx400 | Electric EZGO | |||
alltrax DCX400 for sale | Electric Club Car | |||
Alltrax DCX400 install | Electric EZGO |