lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-07-2012, 11:47 AM   #1
makobuggie
Gone Wild
 
Join Date: Jul 2011
Posts: 389
Default G1 crank bearings

Hello, im rebuilding a g1 , should the bearings be installed in engines cases first? Or put on the crank first? Im thinking of putting them in the cases first , heated up, thanks.
makobuggie is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-07-2012, 06:04 PM   #2
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 9,720
Default Re: G1 crank bearings

1. Freeze bearings and crank overnight
2. Heat cases up in bbq on clean tray for 10 min on high
3. Take cases out of bbq and install bearings, drop right in
4. Let them all cool 20 min
5. Reheat cases with new bearings for 10 min on high
6. Remove cases and install cold crank, fits right together
7. Before pressing/bolting together use proper sealant on cases
8. Press/bolt together but don't torque bolts
9. Let cool to room temp and torque bolts

Good luck!
slonomo is offline   Reply With Quote
Old 12-07-2012, 07:20 PM   #3
makobuggie
Gone Wild
 
Join Date: Jul 2011
Posts: 389
Default Re: G1 crank bearings

Quote:
Originally Posted by slonomo View Post
1. Freeze bearings and crank overnight
2. Heat cases up in bbq on clean tray for 10 min on high
3. Take cases out of bbq and install bearings, drop right in
4. Let them all cool 20 min
5. Reheat cases with new bearings for 10 min on high
6. Remove cases and install cold crank, fits right together
7. Before pressing/bolting together use proper sealant on cases
8. Press/bolt together but don't torque bolts
9. Let cool to room temp and torque bolts

good luck!
thanks for your help, will do.
makobuggie is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
crank bearings are nightmares Gas EZGO
Crank bearings g1 Gas Yamaha
Crank bearings Gas EZGO
does any one have the #'s off of the crank bearings? or the seals for the 88 2-pg? Golf Carts and Parts
crank bearings Gas Yamaha


All times are GMT -5. The time now is 01:57 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.