|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-28-2015, 01:43 PM | #1 |
Gone Wild
Join Date: Dec 2010
Posts: 635
|
Batt Conn 95 EZ GO Dcs
I have a 95 Elect DCS on the pos and neg where the 36 volt comes from there is a # 10 Org Wire connected to the Pos and A #10 Blk wire connected to the Neg also have another cart identical to it it does not have these wire in its wiring harnes does anyone Know what they might go to Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2015, 03:14 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Batt Conn 95 EZ GO Dcs
You should have a 10g wire on each main + and - for the charge connection. Anything additional is aftermarket. Lights maybe? Seat warmer? Blender?
|
05-28-2015, 03:14 PM | #3 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Does the cart have a battery meter? That could be what it is. Sounds like something that was added on. Trace the wires see where they go.
|
05-28-2015, 03:22 PM | #4 |
Gone Wild
Join Date: Dec 2010
Posts: 635
|
Re: Batt Conn 95 EZ GO Dcs
Does Have a Batery Meeter but it dosnt require 10 ga wires the wires go into the factory wiring harnes makeing them diffilcult to chase out guess i can take body off then i can follow them
|
05-29-2015, 11:27 PM | #5 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
If it is not the charge receptacle wire then I would have no clue., Unless maybe someone installed a voltage reducer under the cowl or something.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Batt question | Electric Club Car | |||
3 12 volt batt | Electric EZGO | |||
batt light | Electric Club Car | |||
Wristpin size? Conn. rod length? | Big Block Talk! |