lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-29-2014, 05:04 PM   #11
BrewCityMusic
Hammer Down !!!!
 
BrewCityMusic's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
Default Re: Pulser coil ohm question

You're welcome for now - once You decide to pull that flywheel You'll likely curse me and my assistance in a BIG way, LOL. Lots of PB Blaster, several Cold Ones, and a lot of patience will help.
BrewCityMusic is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-30-2014, 07:02 PM   #12
andrew360bmx
Not Yet Wild
 
Join Date: Dec 2014
Posts: 6
Default Re: Pulser coil ohm question

I just got new pulsar and right out of box reads 18 ohmes now could it still possibly work if I hook it up and get right volts?
andrew360bmx is offline   Reply With Quote
Old 12-30-2014, 07:06 PM   #13
andrew360bmx
Not Yet Wild
 
Join Date: Dec 2014
Posts: 6
Default Re: Pulser coil ohm question

Got bran new pulsar out of box ready 18 ohmes right out of box is it still possible for it to read right volts when I connect it to cart?
andrew360bmx is offline   Reply With Quote
Old 06-26-2015, 11:12 AM   #14
RayRay
Not Yet Wild
 
Join Date: Sep 2010
Posts: 2
Default Re: Pulser coil ohm question

saw this post from last year. I have a h499 ezgo gas that has a weak spark. it runs intermittent . do you have pic of flywheel with magnet on it. Thanks in advance
RayRay is offline   Reply With Quote
Old 05-18-2020, 08:37 PM   #15
Charlyc99
Not Yet Wild
 
Join Date: May 2020
Posts: 9
Default Re: Pulser coil ohm question

Quote:
Originally Posted by tonyton View Post
Hey,
The technicians manual say the resistence is 20- 25 ohms on the 200 or 300 ohm scale on the VOM. That's a bench test, motor off. Check it again. The two leads to the plug to the pulser coil. Outside of that range is no good!

I ser my meter to 200, I get 19.9.
Charlyc99 is offline   Reply With Quote
Old 05-18-2020, 09:00 PM   #16
Charlyc99
Not Yet Wild
 
Join Date: May 2020
Posts: 9
Default Re: Pulser coil ohm question

Quote:
Originally Posted by chardonite View Post
Hey toomey, it seems to me the pulser coil is nothing but a pulse generator. Being a pulse generator it should produce AC voltage when the engine is cranked.Probably .5 volts AC or more. I use this method to identify bad pulse generators on cars all the time. Good luck and I hope this info helps.
Chardonite.....

I put my meter leads on the pulse pigtails and cranked the engine and only got .1 AC.
Charlyc99 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Timing/pulser Coil---help--- Gas EZGO
pulser coil Gas EZGO
G1 Pulser coil Gas Yamaha
Ignition Coil Question Gas Yamaha
Ignition Coil Question Gas Club Car


All times are GMT -5. The time now is 07:59 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.