|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-10-2010, 08:37 AM | #1 |
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
96 EZ-GO 36V Shutters in FWD but fine in REV
I have a 96 EZ-GO 36V, that has always ran great, it sat last year until I could afford new batteries. I put all new batteries and cables in it and now it shutters when I try to move FWD, however REV works fine. I put a new solenoid in thinking that might be the problem but that didnt work... I lifted the rear off the ground to see if the wheels would move, but they still wouldnt in FWD. Does anyone have an idea what could be wrong? Thanks for your help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2010, 11:45 AM | #2 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
Worn motor brushes would be my guess or the wire has melted off the brush due to excessive wear and is making intermittent contact with the armature.
|
08-10-2010, 11:57 AM | #3 |
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
Does that mean its time for a new motor?
|
08-10-2010, 12:34 PM | #4 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
I doubt it's the motor. Check the contacts on the F-N-R switch.
|
08-10-2010, 12:35 PM | #5 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
Oops, Double post, slow server.
|
08-10-2010, 01:07 PM | #6 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
i would also say your issue is with your f-n-r switch. check those terminals there.
|
08-11-2010, 07:57 AM | #7 |
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
The f-n-r switch appears to be ok with no broken wires or lose connections. Am I missing something?
|
08-11-2010, 08:05 AM | #8 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
what about connection on motor. One loose/bad connection will cause a shutter
|
08-11-2010, 08:25 AM | #9 |
Gone Wild
Join Date: Mar 2010
Location: Mountaindale, Oregon
Posts: 303
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
|
08-24-2010, 05:56 PM | #10 |
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
Re: 96 EZ-GO 36V Shutters in FWD but fine in REV
I took the FNR apart and cleaned it....still no luck. I noticed that the wires from the control box to the motor get warm if I press the accelerator for a minute or so while in forward. It still acts like it wants to move forward but just cant go...
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cart Shutters under full load | Electric Club Car | |||
Slows Down, Then Shutters at Full Pedal | Electric Club Car | |||
cranks fine | Gas EZGO | |||
'97 48 Volt CC that Shutters and won't move | Electric Club Car |