12-05-2010, 03:12 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
RPM
Where can I find a tack for my ez go?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-05-2010, 03:39 PM | #2 |
Getting Wild
Join Date: Sep 2010
Location: Vermont
Posts: 105
|
Re: RPM
Go to E-Bay and search for a small engine tachometer.
Also search this forum for a post by Texas001. He recently had the same question. |
12-05-2010, 03:47 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: RPM
Thanks
|
12-08-2010, 04:58 PM | #4 |
Not Yet Wild
Join Date: Dec 2010
Location: Minneapolis, Kansas
Posts: 66
|
Re: RPM
You can also try tinytach.com They make a pretty good tach.
|
12-08-2010, 05:10 PM | #5 |
Not Yet Wild
Join Date: Dec 2010
Location: Port St Lucie ,Florida
Posts: 38
|
Re: RPM
Without checking all of your post Bud Light , what motor are you running?
the 2 or 4? Gary |
12-08-2010, 07:10 PM | #6 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: RPM
350 4 cycle
|
12-08-2010, 07:42 PM | #7 |
Not Yet Wild
Join Date: Dec 2010
Location: Port St Lucie ,Florida
Posts: 38
|
Re: RPM
You should be able to ad on a marine tach from ebay or somethin since it is a 4 stroke and just set to you cylender count.
Gary |
12-08-2010, 07:53 PM | #8 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: RPM
Thanks I will check it out.
|
12-08-2010, 09:38 PM | #9 |
Gone Wild
Join Date: Sep 2010
Location: Decatur,IL
Posts: 553
|
Re: RPM
Or a used kart racing tach from digitron or Micron. Somed of those you can even rig up a speedo.but you might have to some some yankee engineering to get that part to work
|
12-12-2010, 07:33 PM | #10 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: RPM
Ordered one off ebay for $15.00. Got it yesterday. Have not installed it yet. I took it out of the box and the wire that goes to the plug wire looks like it might be to short. I will check it when I can. Hope I can do this tomorrow.
|