trouble finding wiring

[northwestfarmtn]

Hey I been looking for a wiring diagram that I know I have seen and used but cn't seem to find. I have a controller with 3 tabs B+,B- M* and 4 inputs from the i.t.s. it is a series cart, 98 txt, 36v. I cannot find the proper diagram in the ezgo forum any help I must b missing something

[JohnnieB]

This should work

[JohnnieB]

Wait a minute, you said 4 inputs from the ITS, that doesn't ring any bells.

Does the controller have a label on it.
Some pictures would held identify it.

[kgsc]

Job, I think he meant 4 wires from the pedal box. White, black, red and green I believe

[northwestfarmtn]

That looks like what I need. Thank you. Surprised i couldn't find it in my own. 4 wires coming from the pedal box like kg said

[yurtle]

Replacing mine is on a to-do list. Once every couple of months, I have to wiggle it to go. Seems to be a problematic connector, though mine is a '98 so...

[northwestfarmtn]

???

[JohnnieB]

Originally Posted by yurtle

Replacing mine is on a to-do list. Once every couple of months, I have to wiggle it to go. Seems to be a problematic connector, though mine is a '98 so...

Is this a reply to a different thread????

[yurtle]

I was talking about my 4 wire molex connector from the pedal box. I've cleaned it and even tried bending the females plugs inside for a tighter connection, but it's still a problematic connector.

[JohnnieB]

Originally Posted by yurtle

I was talking about my 4 wire molex connector from the pedal box. I've cleaned it and even tried bending the females plugs inside for a tighter connection, but it's still a problematic connector.

If and when that connector on my cart starts misbehaving, I gonna cut it off and solder the wires together like I did on the in-line connector from the Reed switch.