|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-09-2019, 04:46 PM | #11 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Personality switch for Alltrax
Switch
Sent from my SM-G950U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-09-2019, 05:10 PM | #12 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Personality switch for Alltrax
That's the one I use. It's hidden up in the battery compartment above the eyeline.
|
07-09-2019, 05:12 PM | #13 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Personality switch for Alltrax
If you connect two wires without using the switch and User1 and User2 become active, then you likely have a wiring problem.
Do a continuity test on the cable to make sure is not pinched somewhere and causing a short. |
07-09-2019, 08:35 PM | #14 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Personality switch for Alltrax
Im not sure why both user buttons light up in the monitor tab of the toolkit program when my switch is position 1 or 2, but it seems to be responding to the parameters I have set in the tool kit. Position 0 on my switch it hauls but, position 1 or 2 is more like a normal cart, which is how I have the program set.
|
07-09-2019, 08:35 PM | #15 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Personality switch for Alltrax
I think one of my terminals in the plug I made up may not have been pushed in far enough into the connector.
|
07-10-2019, 06:36 AM | #16 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Personality switch for Alltrax
|
07-10-2019, 07:51 AM | #17 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Personality switch for Alltrax
No i don't think it was. As it sits, both user 1 and 2 show on at the same time in the monitor folder of the toolkit when my switch is in position 1 or 2. Hell if I know what is going on.
Sent from my SM-G950U using Tapatalk |
07-10-2019, 08:12 AM | #18 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Personality switch for Alltrax
It has to be the cable, connector or the switch, since only one of the two pins has power at the time, they cannot both show ON in the monitor.
|
07-10-2019, 08:18 AM | #19 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Personality switch for Alltrax
I will check the switch with a meter tonight. So If I understand correct, when my switch is in the 1 position, I should show voltage there, but zero volts on the 2nd position pin correct? Nolefan4ever how do you have your switch wired up? Do you have power going to the center pin?
|
07-10-2019, 08:23 AM | #20 | |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Personality switch for Alltrax
Quote:
In the center position there should be no power to either side. When you place the switch in one of the other two positions, only the pin on the opposite side that is depressed should have power. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Personality Plugs | Electric EZGO | |||
Alltrax Personality Switch - Use and Profile Suggestions | Electric EZGO | |||
Personality plug? | Electric EZGO | |||
A couple of switch questions - Run/Tow and Alltrax "Personality" | Electric EZGO | |||
Will the red ezgo personality plug help? | Electric EZGO |