real roll cage?-custom rollcage?

[hotwatermusic]

where can i purchase a real roll cage-roll bar for a yam g14? not the decorative ones on all the sites..

[Yamaha4life]

Ive seen them before but there about 1000 dollars...

[smallblock450sl]

Originally Posted by hotwatermusic

where can i purchase a real roll cage-roll bar for a yam g14? not the decorative ones on all the sites..

I've seen some good looking "decorative" roll bars in publications. The rear mount would be simple...a welded braket off the main frame , with a "splice tube" and cut a hole in the body for a "receiver attatchment point" the front is much more complicated......must get it to the main frame. I was thinking more of a "speedster" roll bar set up. Two "hoops" on the back of each seat back assy's. "Jakes" seems to have built a nice unit for the new "The Drive" but if you've seen the front windsheild frame mount on them....You might not feel that safe..... Remember all Yamaha's G8 to G22 share the the same frame and mounting points. "Sometimes I sits and thinks.....Sometimes I just sits".... Make a better mouse trap! Good luck Dave

[shawn.m]

well you can buy a strech plastics sport cage

found http://www.liftedgolfcarts.com/Ntense Tunes & Toys
(602) 992-2955
which seems to have a decent cage
http://www.metaltechproducts.com/Catalog_greyscale.pdf

you can also go to http://www.mikesmotortoys.com/
he says that he can custom build cages in house $750 raw, $950 coated

[shawn.m]

Ok i just tried calling Ntense Tunes & Toys and they are out of business.
I did get a number of a guy from Metal Fab that might be able to build a custom cage 623 215 0581 Robert. he was the one building the cages for Ntense

Next I called BajaReady.com as he has made a couple of cages for Yamaha golf carts. He has stopped making them because of the price of steel and low demand.

Part of this is coming back to the low demand for custom golf cart stuff and high demand for UTV's.

Cages for rangers and rhinos ranged from $800-$3000 raw at Metal Tech.

[hotwatermusic]

THANKS ALOT SHAWN.. i checked out the web sites and they have some nice stuff, but i assume its like you said just not a high demand. but when i get a chance i'll give him a call

[shawn.m]

ok just talked to Robert. He was saying that it would be about $1000 for raw cage plus shipping $250 and then powder coat. $ 300 - looking at $1500

[shawn.m]

Oh forgot Terra Toys also has 3 point sports cages for like $450 plus shipping. I would think about it just to get the rear seat
http://www.terratoysfabrication.com/
Phone # 928-627-7300 Fax# 928-627-7344


Address:
County 17 th and Ave. F
#16867 Somerton, AZ.


Mail: P.O.Box 2751

[dfmiddle]

Go custom then you can design and have it made the way you want. not just a box