|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
03-03-2012, 06:01 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Tampa FL.
Posts: 27
|
Solenoid clicking when running
I have a 00 club car that runs but the silinoid clicks rappedly tryed putting a new one in and the same thing any help would be great.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-03-2012, 06:09 PM
|
#2 |
|
Gone Wild
 Join Date: Nov 2010
Location: Auburndale,fl
Posts: 256
|
Re: Silinoid clicking when running
 |
|
|
|
|
03-03-2012, 06:10 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Silinoid clicking when running
WELCOME to be BGW!
You are describing a low-voltage situation. The solenoid is not getting enough voltage to stay energized. Attach a voltmeter to the battery pack and drive the cart, observed the voltage drop and post it here. |
|
|
|
|
03-03-2012, 06:10 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Tampa FL.
Posts: 27
|
Re: Silinoid clicking when running
Thanks Schunter
|
|
|
|
|
03-03-2012, 06:22 PM
|
#5 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Tampa FL.
Posts: 27
|
Re: Silinoid clicking when running
It drops to 46 and it starts to kick and buck
|
|
|
|
|
03-03-2012, 06:30 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Silinoid clicking when running
48v is empty. 50.1 is full. You can repeat the test connected to the individual batteries and see if you can find the one that's dropping a cell (2+ volts) . That's my guess.
|
|
|
|
|
03-03-2012, 07:42 PM
|
#7 |
|
Getting Wild
Join Date: Jan 2012
Posts: 101
|
Re: Silinoid clicking when running
These guys know same guys helped me with similar problem
|
|
|
|
|
03-04-2012, 08:51 AM
|
#8 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Tampa FL.
Posts: 27
|
Re: Silinoid clicking when running
Ok I checked my batteries and 5 of the 6 are at 8.13 or higher and one is at 7.81 and just for some history these are 3 week old batteries with minnamal use the cart had a high speed motor 400 amp speed controller h/d f&r and solenoid.So if that batterie is bad is it ok to just swap out that one or should the hole set be replaced
|
|
|
|
|
03-04-2012, 08:56 AM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Silinoid clicking when running
Before replacing the battery check the pack voltage at the charger receptacle. Make sure that all the batteries are connected positive to negative all the way through the battery string. It is a possibility that one of your batteries has been installed backwards or that your charge leads are not connected at the proper location leaving one battery out of the charge loop.
if you do have one bad battery it's okay to replace just one in a new pack. |
|
|
|
|
03-04-2012, 09:42 AM
|
#10 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Tampa FL.
Posts: 27
|
Re: Silinoid clicking when running
48.1 at the receptacle but I now see my charger is not working
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Solenoid clicking....no go!!! | Electric Club Car | |||
| Clicking Solenoid | Electric EZGO | |||
| HD solenoid clicking | Electric EZGO | |||
| solonoid clicking,running with key off | Electric Club Car | |||
| solenoid clicking | Electric Club Car | |||
Linear Mode
