05-21-2015, 04:50 PM | #1 |
Not Yet Wild
Join Date: Oct 2014
Location: NC
Posts: 30
|
Lost Low End Torque..
Guys, have a 94 EzGo lifted that lost quite a bit of low end torque and will not pull some of the hills that it use to. The drive clutch was slipping so we replaced that. I put a 28* driven clutch on same with a severe duty belt. Still no change. It seems like it's just not opening up when put under a load. So I gauged the valves, check compression and everything checked out just fine.. Can you guys send me some other ideas to help me out!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-22-2015, 06:38 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Lost Low End Torque..
Free bump.. brakes hanging up?
|
05-22-2015, 09:40 AM | #3 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Lost Low End Torque..
Does the driven clutch require prewrap and if so you could try adding more
|
06-02-2015, 11:51 PM | #4 |
Not Yet Wild
Join Date: Jun 2015
Posts: 2
|
Re: Lost Low End Torque..
Just had this same issue on a 2005 ezgo. On mine it was a bad Voltage regulator, it can Full Field the generator.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
need torque LBS and torque pattern for 2000 club car ds gas transaxle | Gas Club Car | |||
Lost.... | Gas EZGO | |||
D&D Speed&Torque vs. D&D High Torque | Electric EZGO | |||
Torque Lost afte Power Spring Install | Gas Club Car | |||
Lost torque on motor swap | Lifted Golf Carts |