lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-30-2018, 02:50 PM   #1
jakehanl
Gone Wild
Yamaha
 
Join Date: Jan 2015
Posts: 239
Default Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0?

Just curious to know how Yamaha originally configured their throttle wiper board; as to whether it was 5k-0 or 0-5k? Reason for the question is that the person who had the cart before me had installed a Curtis PMC 1204-410; which I believe is a 5k-0. Thus made me wonder is the original wiper board was the sam 5k-0 or not. I was planning to install a PB-6 shortly, but I understand that they are only 0-5k; therefore made me think that even attempting to try the cart with the controller in their now might not work?



jakehanl is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-30-2018, 02:55 PM   #2
LukeL
Gone Wild
 
LukeL's Avatar
Club Car
 
Join Date: Jun 2017
Location: Savannah, GA
Posts: 5,895
Default Re: Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0?

Thatís setup for 0-5k Iím sure. Originally it was nothing, as it was a resistor cart.

Most Curtis 1204ís are 0-5k input.


Club Car DS driverís club #59
LukeL is offline   Reply With Quote
Old 10-30-2018, 02:58 PM   #3
jakehanl
Gone Wild
Yamaha
 
Join Date: Jan 2015
Posts: 239
Default Re: Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0?

What's weird is that when you look up the model Curtis PMC 1204-410 it shows that controller as a 5k-0. Check out this chart...

https://www.ddmotorsystems.com/ContCrossRefCurtis.htm

That's why I'm a bit confused about this, and since I already ordered a PB-6 I got worried because it is only a 0-5k unit.

Thoughts?

[IMG][/IMG]
jakehanl is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
2013 RXV Curtis: Throttle wiper fault Electric EZGO
1988 Marathon Electric - Arcing Wiper Board - Tried Everything, Need Ideas Electric EZGO
Wiper board sparkes and smokes Electric EZGO
Resistor wiper contact board Electric EZGO
cleaning contacts on wiper board Electric EZGO


All times are GMT -5. The time now is 04:19 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.