G9 project

pizzamaker · 04-21-2009, 12:51 PM

Quote:

Originally Posted by spriddle

I'm not familiar with the hill brake spring. Post a link so I can check it out. I usually let my engine do a lot of the braking going down hills and then just hit the brake every so often; yes, I have a class a cdl.

jake brake

spriddle · 04-21-2009, 01:31 PM

LOL! I wondered if anyone would catch that.

p.s. I do actually have a class a cdl.

dock98 · 04-21-2009, 04:32 PM

when do you get your class "A" cdl?is there another test to move up?lol

10507581 · 04-21-2009, 07:49 PM

Good news, found the g-9 rear body and lower front cowl for only 110 bucks for both them. I also talked to my neighbor who is a manager of a paint shop and he told be he can spray any color i want using line-x

So i am getting really anxious, i also am planning on making some really custom headlights in to the front cowl.

10507581 · 04-24-2009, 12:43 AM

Any ideas what is going on under the seat. So i changed my starter and drive belt today and when driving the cart up to a high speed then letting of the throttle it gets a sound that sound like gears meshing agaisnt each other. So i changed the gear oil, which was a lovely black color. The sound presisted, at this point i told my friend to drive the cart and i am going to sit on back and see where the noise is coming from. Didn't see anything wrong and it was the differential making the noise. I also replaced the exhaust gasket which only has one bolt holding it down. Do think i tightened the starter belt to tight? could it be the new belt? an

10507581 · 04-28-2009, 11:53 PM

the body for the cart came in today, i will post some pictures soon.

dirtysouth · 04-29-2009, 12:05 AM

Quote:

Originally Posted by spriddle

p.s. I do actually have a class a cdl.

I have a class A, but no cdl... Does that make me a bad person???

10507581 · 04-29-2009, 04:40 PM

I have all the body parts now, all the mechnical parts, i am down to getting it painted and the accessories. But i can't do anything to the cart till my finals are over

Next Monday

TheNewGuy · 04-29-2009, 06:08 PM

Quote:

Originally Posted by 10507581

I have all the body parts now, all the mechnical parts, i am down to getting it painted and the accessories. But i can't do anything to the cart till my finals are over

Next Monday

The cart will wait, it's more important to do well on the finals.

10507581 · 04-29-2009, 10:02 PM

Yeah, I know. It is just funny because i planned on everything not to come in till after finals. Sure enough the week i need to study everything is here. NewGuy i was meaning to ask you if you have a blue print on your swing arm drop brackets. I am wanting to fab some up and yours look great. I am also planning on doing the bracket up front, kinda like you did just a little different. But anything helps, thanks

04-21-2009, 01:31 PM	#72
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,873	Re: G9 project LOL! I wondered if anyone would catch that. p.s. I do actually have a class a cdl.

04-21-2009, 04:32 PM	#73
dock98 doin it in the desert Join Date: Dec 2008 Location: Sonora Desert,Az Posts: 5,603	Re: G9 project when do you get your class "A" cdl?is there another test to move up?lol

04-21-2009, 07:49 PM	#74
10507581 Gone Wild Join Date: Mar 2009 Location: Jenks Oklahoma Posts: 299	Re: G9 project Good news, found the g-9 rear body and lower front cowl for only 110 bucks for both them. I also talked to my neighbor who is a manager of a paint shop and he told be he can spray any color i want using line-x So i am getting really anxious, i also am planning on making some really custom headlights in to the front cowl.

04-24-2009, 12:43 AM	#75
10507581 Gone Wild Join Date: Mar 2009 Location: Jenks Oklahoma Posts: 299	Re: G9 project Any ideas what is going on under the seat. So i changed my starter and drive belt today and when driving the cart up to a high speed then letting of the throttle it gets a sound that sound like gears meshing agaisnt each other. So i changed the gear oil, which was a lovely black color. The sound presisted, at this point i told my friend to drive the cart and i am going to sit on back and see where the noise is coming from. Didn't see anything wrong and it was the differential making the noise. I also replaced the exhaust gasket which only has one bolt holding it down. Do think i tightened the starter belt to tight? could it be the new belt? an

04-28-2009, 11:53 PM	#76
10507581 Gone Wild Join Date: Mar 2009 Location: Jenks Oklahoma Posts: 299	Re: G9 project the body for the cart came in today, i will post some pictures soon.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-29-2009, 04:40 PM	#78
10507581 Gone Wild Join Date: Mar 2009 Location: Jenks Oklahoma Posts: 299	Re: G9 project I have all the body parts now, all the mechnical parts, i am down to getting it painted and the accessories. But i can't do anything to the cart till my finals are over Next Monday

04-29-2009, 10:02 PM	#80
10507581 Gone Wild Join Date: Mar 2009 Location: Jenks Oklahoma Posts: 299	Re: G9 project Yeah, I know. It is just funny because i planned on everything not to come in till after finals. Sure enough the week i need to study everything is here. NewGuy i was meaning to ask you if you have a blue print on your swing arm drop brackets. I am wanting to fab some up and yours look great. I am also planning on doing the bracket up front, kinda like you did just a little different. But anything helps, thanks

Similar Threads
Thread	Forum
G16 project	Gas Yamaha
My project cc 83	Lifted Golf Carts
Next Project	Members Rides
G16 Project	Gas Yamaha
New G-16 Project	Gas Yamaha