|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-25-2020, 08:18 PM | #1 |
Not Yet Wild
Join Date: Feb 2020
Posts: 1
|
GTW Grease Zerk Size
I installed a GTW 6" lift kit on my 2015 Club Car Precedent. While greasing everything one of the zerks broke. I was able to remove the piece in the A-Arm but don't know what size it is. I bought a mixed pack of SAE but the smallest one seems to get in a bind. Looking for info on the correct size if anyone has information. Don't want to force the one I have if its incorrect.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2020, 10:48 PM | #2 |
Not Yet Wild
Join Date: Jul 2014
Location: So Cal
Posts: 34
|
Re: GTW Grease Zerk Size
Hello Scotty,
McMaster will have what you are looking for not sure what style you are for but here is a link to get you close. www.mcmaster.com/zerk-grease-fittings Derek |
03-25-2020, 10:56 PM | #3 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: GTW Grease Zerk Size
Typically the smallest SAE fitting is 1/4”-28 thread. There are smaller metric fittings at 7x1.00 thread, which may be what the GTW kit used.
Good news is zerk fittings are tough, and the smaller sizes taper, so you can probably just force it in there a few turns it will cut its own threads and will never come out. If that doesn’t work out, tap the threads to 1/4”-28 size or go up to the next size, 5/16-24 I think? |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 primary clutch grease or no grease?? | Gas Yamaha | |||
Front right spindle won't take grease with new zerk? | Electric Club Car | |||
Looking for G16 drive clutch grease zerk | Gas Yamaha | |||
73' D4 Grease Zerk Fittings? | Gas Harley Davidson | |||
Taylor-Dunn wheel gear assembly grease plug size? | Gas Harley Davidson |