|
06-19-2016, 03:47 PM | #1 |
Not Yet Wild
Join Date: Jan 2016
Posts: 55
|
Crazy idea or smart
Would a 250 cc carb off a dirt bike work o. These old 244 robins, if engine work is done, ex bore shaved head, upgraded coil wire ect, any input would be appreciated!
|
06-20-2016, 04:23 PM | #2 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: Crazy idea or smart
It will work, I have a buddy that is running a 34mm mikuni on his. He had to replace the throttle cable running it directly to the foot pedal. He over bored and took .030 from the head.
|
06-21-2016, 03:27 PM | #3 |
Not Yet Wild
Join Date: Jan 2016
Posts: 55
|
Re: Crazy idea or smart
Any chance you know if he noticed anything speed or torque wise?
I know they say these robins can't be powerful engines, but I refuse to believe a 2 stroke can't put out more than 18 mph |
06-21-2016, 07:41 PM | #4 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,489
|
Re: Crazy idea or smart
It took me a few days to remember who did this experiment.
http://www.buggiesgonewild.com/gas-e...b-exhaust.html |
06-21-2016, 08:01 PM | #5 |
Not Yet Wild
Join Date: Jan 2016
Posts: 55
|
Re: Crazy idea or smart
That was swapping ezgo carbs I'm thinking if I swap it with a motorcycle carb it'll be jetted for more performance and kick a little more power out.
|
06-21-2016, 08:38 PM | #6 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Crazy idea or smart
I tried multiple sizes of mikunis when I had the robins 2 stroke in my ezgo. 28,30,32,34. I settled on the 32. I tried a lot of mods to make it breath well enough for the 34 but I think the reed placement limits that. 32 was the sweet spot for me. Velocity was lost with anything larger.
|
06-21-2016, 10:14 PM | #7 |
Not Yet Wild
Join Date: Jan 2016
Posts: 55
|
Re: Crazy idea or smart
I figured the breathin issue would be the demon, how far were you able to push your 244
|
06-22-2016, 06:25 AM | #8 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Crazy idea or smart
It's been a while, but I could turn it about 5500-6000 I think. I had built a custom intake and used a set reeds from a dirt bike that were larger.
I also just looked back a couple years. I was wrong. I did even more testing that I thought. I ended up with a 26 mm mikuni. I apologize for the wrong info given. There's been a lot of projects since then. |
Tags |
gas ezgo |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Crazy idea? | Electric EZGO | |||
Crazy idea....or is it | Lifted Golf Carts | |||
Crazy Arsed Idea | Electric EZGO | |||
Is this a crazy idea or has someone done it? | Electric golf carts | |||
Crazy Idea | Electric Club Car |