|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
06-19-2016, 09:16 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 6
|
Replacing ignition switch on G29 gas
I got a new ignition for my 2016 G29 with a different/uncommon key. Just part of an attempt to make theft a little more inconvenient. The part looked plug and play so I unplugged the old ignition and plugged the new one.
It works. However, the fuel/hours gauge is flashing now. I figured the part was defective, but replacing the old ignition did not correct the problem. Anyone have any ideas why the gauge is flashing? BTW, it stops flashing and works properly when I turn the hazard lights on. Smells like a wiring problem, but the car was fine before the ignition switch change. |
06-21-2016, 08:33 PM | #2 |
Not Yet Wild
Join Date: Jun 2016
Posts: 6
|
Re: Replacing ignition switch on G29 gas
Well, I figured it out. It turns out the fuel gauge flashes when the turn signal is activated. I must have activated the turn signal by mistake while installing the new switch. The turn signal makes no clicking noise, it just flashes the light in the fuel gauge, and the fuel indicator makes a motion in the direction of the turn signal.
It worked fine when I activated the hazard lights because the hazards overrode the default turn signal behavior. Hope this helps someone. |
02-05-2018, 08:57 PM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Replacing ignition switch on G29 gas
Old thread but do you have the part number on the switch you bought?
|
02-06-2018, 12:38 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Replacing ignition switch on G29 gas
ju2-h2510-20-00 is part number for "random key" switch. Comes with switch and 2 keys (only one key in rubber boot, other key bare). "XXXXX-10-00" is common key, so don't buy that one. This is for carts with 2-position key switch "off-on", not for carts with third key position to activate lights.
|
02-06-2018, 07:01 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Replacing ignition switch on G29 gas
Cgtech I have that one xxxxx-10-00 with no keys, what do the keys only go for?
Can you ship me a few and what’s the price? My other cart I’d like to get that random key one so no one has a key for it. |
02-07-2018, 04:10 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Replacing ignition switch on G29 gas
The generic part number for the key is 1922, but I would suggest going with one of our site sponsors instead. I don't ship parts, so I can't really help ya.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
replacing ignition (key) switch | Gas Club Car | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
replacing an ignition | Electric Club Car | |||
Replacing g16 ignition coil how to? | Gas Yamaha |