|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-15-2017, 08:07 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2016
Posts: 5
|
Yamaha g2 engine
Have anyone installed new cylinder rings on their g2. Mine is smoking. Already did the valve seals with the air hose. Was wondering if the jug comes off like a 4 wheeler engine or you actually have to go to the bottom of the engine and disconnect the connecting rod from the crank and push the piston out or I can simply remove the jug and leave the bottom end alone
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-16-2017, 06:47 PM
|
#2 |
|
Not Yet Wild
Join Date: Feb 2017
Location: Austin, TX
Posts: 51
|
Re: Yamaha g2 engine
I did mine a couple weeks ago, you have to go through the bottom as it is all one piece. Not a tough job though and to be honest pretty fun!
|
|
|
|
|
04-17-2017, 07:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 3
|
Re: Yamaha g2 engine
Mine is smoking pretty bad also,Did you just replace rings. Or bore it out and new piston rings combo? Did you have to pull the whole engine assembly out of the cart? Thanks
Chris  |
|
|
|
|
04-17-2017, 08:35 PM
|
#4 |
|
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha g2 engine
I did mine and I pulled the hole engine, and Cpvfly I have a starting parts u need if u want to PM me
|
|
|
|
|
| Tags |
| g2 engine |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha gas engine. G2-G9 | Golf Carts and Parts | |||
| Yamaha g9 engine | Golf Carts and Parts | |||
| WTB: Yamaha G2/G8/G9/G14 Engine | Golf Carts and Parts | |||
| Yamaha G16 engine | Golf Carts and Parts | |||
| Yamaha G2 engine | Golf Carts and Parts | |||
Linear Mode
