|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-14-2018, 09:47 AM | #1 |
Getting Wild
Join Date: Dec 2011
Location: Maine in Summer Florida in Winter
Posts: 103
|
G16 Drive Clutch Replacement
I am replacing the drive clutch in a G16. Borrowed a puller from a friend. Makes the job a snap. The question I have is that the new clutch that is en route to me makes reference to “comes with oil pump drive gear”. I assume that is inside the crankcase and, obviously, this clutch is external. Will this drive gear be separate or did I order the wrong one? Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-14-2018, 11:49 AM | #2 | |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G16 Drive Clutch Replacement
Quote:
|
|
08-14-2018, 12:00 PM | #3 | |
Getting Wild
Join Date: Dec 2011
Location: Maine in Summer Florida in Winter
Posts: 103
|
Re: G16 Drive Clutch Replacement
Quote:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
|
08-14-2018, 06:43 PM | #4 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G16 Drive Clutch Replacement
Do your old clutch have a shoulder on it where the gear is pictured? If so it may be the same clutch two Jay bars will pop the gear right off it's only lightly pressed on
|
08-14-2018, 06:59 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G16 Drive Clutch Replacement
I'm so disappointed in those Comet clutch's...You will find that the clutch won't start to engage till very high RPM's. You'd have better served to bought an OEM replacement. What was wrong with your old clutch?
|
08-14-2018, 07:11 PM | #6 |
Getting Wild
Join Date: Dec 2011
Location: Maine in Summer Florida in Winter
Posts: 103
|
Re: G16 Drive Clutch Replacement
The rollers are all worn out and one of the weights came out and hit the cover and locked it in.
|
08-14-2018, 07:32 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G16 Drive Clutch Replacement
I use "Gboosttechnologies" steelroller/pin kits for the fraction of the cost. But there not site sponsors
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
I have an 87, but a replacement drive clutch doesn’t look right | Gas EZGO | |||
Drive clutch spring replacement? | Gas EZGO | |||
'86 drive clutch spring replacement | Gas EZGO | |||
83 EZGO Drive Clutch Replacement | Gas EZGO | |||
Drive Clutch Replacement on a Gas 4cycle Workhorse | Gas EZGO |