|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-08-2020, 11:09 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Location: Auckland New Zealand
Posts: 71
|
Jobs to do while replacing the secondary clutch
A buddy of mine is installing a Plowmans Kit into my G2 and replacing the primary and secondary clutch. We're also doing the centre-centre mount. While all this is happening is there anything else we should do while we're there? I have a minor crankcase leak (only noticeable because the dust sticks to the oil) so maybe we should replace that gasket - but is there anything else? The cart is on an island so we need to be very prepared because it's somewhat complex to organise stuff we forget at short notice.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2020, 06:25 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Jobs to do while replacing the secondary clutch
Not sure there is a gasket between the cases, a lot of times it's just grey permatex type sealant. Are you talking about the valve cover?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G16-Clutch and Secondary Clutch setups | Gas Yamaha | |||
G1 secondary clutch | Gas Yamaha | |||
Need primary clutch to secondary clutch distance on a G9 | Gas Yamaha | |||
replacing secondary clutch ezgo 1983 | Gas EZGO | |||
g1 secondary clutch | Gas Yamaha |