|
04-11-2012, 08:04 AM
|
#1 |
|
LIFE IS TAKING FOREVER
 Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Yamaha g9 engine
I have a G9 engine that im going to be taking out to replace with a clone engine. I just rebuilt the engine. New rings and rod bearing. After opening the engine up i noticed that the balancer hole on the block side was worn out so i put it back together with out the balancer. I have put a couple of these engines together with out the balancer and they have run fine and are still running today. You will get the engine, carb, muffler, air boxs, and coil. The only things that im keeping are the starter generator, primary clutch, wiring, and belts. We have taken this cart on a couple of rides and it runs very well. We will keep driving it until its sold. The gov is hooked up on this one so no worries about it getting over run. This cart starts up great with out the choke. The cart also has a new head on it. This is a very clean engine. So just shoot me a resonable offer. I wanted to make sure that the cart was running and working before i took it back apart for the clone. This way i new it was a good engine before i posted it.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-12-2012, 11:34 AM
|
#2 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,858
|
Re: Yamaha g9 engine
Nice looking engine and thanks for being up front about the balancer.
 |
|
|
|
|
|
|
|
04-12-2012, 12:02 PM
|
#3 |
|
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Yamaha g9 engine
I know most people wouldnt want it with out it but im a very fair person and would expect the same from anyone on this site. Everyone ive ever delt with on this site have treated me very very well. If i cant sell it here i will post it on ebay. Like i stated before its a very good engine with a fresh rebuild. Ive done a couple of engines with out the balancer and they run just fine without it.
|
|
|
|
|
04-12-2012, 03:36 PM
|
#4 |
|
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
Re: Yamaha g9 engine
I know you said make offer, but how much are you looking to get?
|
|
|
|
|
04-12-2012, 07:04 PM
|
#5 |
|
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Yamaha g9 engine
I would think i could get around $300 for it. Just to replace a crank it one of these engines would cost you at least that much and im including all the other stuff.
|
|
|
|
|
04-13-2012, 09:36 AM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Where are you located?
Sent from my Titanium using Tapatalk |
|
|
|
|
04-13-2012, 10:55 AM
|
#7 |
|
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Yamaha g9 engine
Im in NY. I can take the engine apart. I would be shipping ups. I get a very good deal on shipping. It would be three boxs. Engine, air box, and muffler. I would take the carb, shrouding and coil off the motor and put it in with the air box.
|
|
|
|
|
04-13-2012, 11:04 AM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
How much would shipping cost me to brantley alabama?
Sent from my Titanium using Tapatalk |
|
|
|
|
04-13-2012, 11:39 AM
|
#9 |
|
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Yamaha g9 engine
send me a PM with your address.
|
|
|
|
 |
| Tags |
| g9 engine |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| yamaha gas engine i d | Gas Yamaha | |||
| WTB: Yamaha G2/G8/G9/G14 Engine | Golf Carts and Parts | |||
| Yamaha Engine | Gas Yamaha | |||
| Yamaha G9 Engine | Golf Carts and Parts | |||
| Yamaha G2 engine | Golf Carts and Parts | |||
Linear Mode
