Rebuilding an EZGO Workhorse / Questions

JerLeeCar · 07-13-2008, 05:29 PM

EZGO 4cycle OHC GXT 804 D Marathon
Serial # A36178
Manufacturing Code A1396 - Means this is a 1996 ?
Robin Engine EH29C - Engine is running

Cart was given to us, intend to rework the body and paint/ seating and accessories, new bigger tires came with it.

Where can I get a Maintence Manual (not the owners manual) for this cart?

Spark plugs were of 2 different sizes, What is the correct plugs for this engine?

Installed a new throttle cable, Govener is maxed out, noticed the rpm has to go up quite a ways before the clutch is engaged, acceleration is very slow but speed picks up later, Would a shorter belt, help the acceleration and the clutch lag?

-Unable to get current belt size by looking, also the tires are bigger than the normal cart tires.

Thanks to anyone who helps!

StoveBolt · 07-13-2008, 06:13 PM

http://www.buggiesgonewild.com/gas-e...iagram-id.html

rusty · 07-13-2008, 09:29 PM

Welcome to the forum JerLeeCar.....................

JerLeeCar · 07-14-2008, 06:37 PM

Thanks StoveBolt, The Engine Service and Parts Manual helped.
Now I have to identify my engine size.

Rusty, Hello to you too!

StoveBolt · 07-14-2008, 07:18 PM

Quote:

Originally Posted by JerLeeCar

Now I have to identify my engine size.

Your right it's a 96 and EH29C = 295cc.

07-13-2008, 05:29 PM	#1
JerLeeCar Not Yet Wild Join Date: Jul 2008 Posts: 3	Rebuilding an EZGO Workhorse / Questions EZGO 4cycle OHC GXT 804 D Marathon Serial # A36178 Manufacturing Code A1396 - Means this is a 1996 ? Robin Engine EH29C - Engine is running Cart was given to us, intend to rework the body and paint/ seating and accessories, new bigger tires came with it. Where can I get a Maintence Manual (not the owners manual) for this cart? Spark plugs were of 2 different sizes, What is the correct plugs for this engine? Installed a new throttle cable, Govener is maxed out, noticed the rpm has to go up quite a ways before the clutch is engaged, acceleration is very slow but speed picks up later, Would a shorter belt, help the acceleration and the clutch lag? -Unable to get current belt size by looking, also the tires are bigger than the normal cart tires. Thanks to anyone who helps!
JerLeeCar Not Yet Wild Join Date: Jul 2008 Posts: 3

07-13-2008, 06:13 PM	#2
StoveBolt Gone Wild Join Date: Feb 2008 Location: Brooklyn, Michigan "Home of M.I.S." Posts: 3,666	Re: Rebuilding an EZGO Workhorse / Questions http://www.buggiesgonewild.com/gas-e...iagram-id.html

07-13-2008, 09:29 PM	#3
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Ride 2010 Club Car Posts: 6,236	Re: Rebuilding an EZGO Workhorse / Questions Welcome to the forum JerLeeCar.....................

07-14-2008, 06:37 PM	#4
JerLeeCar Not Yet Wild Join Date: Jul 2008 Posts: 3	Re: Rebuilding an EZGO Workhorse / Questions Thanks StoveBolt, The Engine Service and Parts Manual helped. Now I have to identify my engine size. Rusty, Hello to you too!
JerLeeCar Not Yet Wild Join Date: Jul 2008 Posts: 3

Similar Threads
Thread	Forum
hobbiest needs help rebuilding old electric ezgo golf cart	Electric EZGO
EZGO Workhorse 1999 Buying	Test Post
rebuilding par car	Gas Columbia ParCar
88 EZGO Workhorse Oil Injected Help	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum