New xct400pds

budlight592 · 08-29-2018, 09:57 PM

Quote:

Originally Posted by lsudevildog

Do you have any pictures of the SW180 installed with the XCT400PDS? You know, the ones that are worth a thousand words when it comes to hooking up everything correctly...

Old thread but I just received my new controller and the SW180 and had the same question if anyone has any pictures of this new solenoid hooked up. Thanks in advance.

scottyb · 08-29-2018, 10:24 PM

http://www.buggiesgonewild.com/elect...s-upgrade.html

cmfj · 04-16-2019, 02:47 PM

Thanks to this thread and all those that supplied valuable information I had to order XTC400 for a 2006 PDS 36v. Thanks to Cartsunlimited.net for the prompt delivery and your quick response to a couple of questions I had while installing. So far so good! A couple of hours and a couple of cold adult beverages last night and an hour or so this morning and up and running? Thank you all! Now to get the photo the correct way.

yurtle · 04-16-2019, 03:50 PM

Welcome!

Read up everything about care and maintenance of batteries, especially if they're new, on ScottyB's website.

cmfj · 04-22-2019, 10:41 AM

Got the cart running and did a little weed spraying yesterday. Noticed an electric burn smell and melted the regen resistor cover. Did I install this backwards? Also, do I dispose of the old speed cable? Large red wire is Battery +, I just labeled when installing so I knew where it went.

JohnnieB · 04-22-2019, 01:40 PM

Quote:

Originally Posted by cmfj

Got the cart running and did a little weed spraying yesterday. Noticed an electric burn smell and melted the regen resistor cover. Did I install this backwards? Also, do I dispose of the old speed cable? Large red wire is Battery +, I just labeled when installing so I knew where it went.

The regen diode was installed backwards and is probably burnt out.

The freedom mode plug is only for the stock PDS controller, no other value.

cmfj · 04-22-2019, 03:04 PM

Thanks... i assumed so... just needed some extra guidance on my error. Thats what I get for a installing after a couple cold ones.

foxbryan22 · 05-02-2019, 10:10 AM

Is there a way to use the xct program when not connected to the controller? To set up maps or adjust and save them for future use

Sent from my SM-G950U using Tapatalk

scottyb · 05-02-2019, 10:37 AM

No- the software requires a controller connection to wake up in my laptop.

cmfj · 05-21-2019, 12:49 PM

So the cart just decided to stop working while parked and charged. It just sat and shuddered. So I did what most rednecks do... tapped the solenoid and it started working again.... my question is when the peddle is depressed all the way down the light on the controller turns red. Is this normal? I have video.

08-29-2018, 10:24 PM	#292
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: New xct400pds http://www.buggiesgonewild.com/elect...s-upgrade.html

04-16-2019, 03:50 PM	#294
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: New xct400pds Welcome! Read up everything about care and maintenance of batteries, especially if they're new, on ScottyB's website.

04-22-2019, 03:04 PM	#297
cmfj Not Yet Wild Join Date: Apr 2019 Posts: 5	Re: New xct400pds Thanks... i assumed so... just needed some extra guidance on my error. Thats what I get for a installing after a couple cold ones.
cmfj Not Yet Wild Join Date: Apr 2019 Posts: 5

05-02-2019, 10:10 AM	#298
foxbryan22 Not Yet Wild Join Date: Feb 2018 Location: Ohio Posts: 14	Re: New xct400pds Is there a way to use the xct program when not connected to the controller? To set up maps or adjust and save them for future use Sent from my SM-G950U using Tapatalk

05-02-2019, 10:37 AM	#299
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: New xct400pds No- the software requires a controller connection to wake up in my laptop.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-21-2019, 12:49 PM	#300
cmfj Not Yet Wild Join Date: Apr 2019 Posts: 5	Re: New xct400pds So the cart just decided to stop working while parked and charged. It just sat and shuddered. So I did what most rednecks do... tapped the solenoid and it started working again.... my question is when the peddle is depressed all the way down the light on the controller turns red. Is this normal? I have video.
cmfj Not Yet Wild Join Date: Apr 2019 Posts: 5