lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-14-2007, 07:55 PM   #1
Rizzo20
Not Yet Wild
 
Rizzo20's Avatar
 
Join Date: Feb 2007
Location: Washington, PA
Posts: 66
Default Yamaha charger on an EZGO

We have a 48 volt charger @ work for our Yamaha G22. That would be great if I could get an adapter or rewire the plug on my E-Z-GO so this charger would work. Any ideas if this will fly?


I found this receptacle: http://www.lvssales.com/store/produc...&cat=0&page=66 As long as the charger will work, I think this is all I need?
Rizzo20 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-14-2007, 07:59 PM   #2
roady89
Guest
 
Posts: n/a
Default

Yes....
  Reply With Quote
Old 05-14-2007, 08:09 PM   #3
Rizzo20
Not Yet Wild
 
Rizzo20's Avatar
 
Join Date: Feb 2007
Location: Washington, PA
Posts: 66
Default

YAY! As long as I don't get fired or quit, sounds like I'm all set. I guess if it goes south, I'll just have to steal it!
Rizzo20 is offline   Reply With Quote
Old 05-15-2007, 05:09 PM   #4
Nate
Gone Wild
 
Join Date: Dec 2006
Posts: 679
Default

Be sure your polarity is correct.
Nate is offline   Reply With Quote
Old 05-15-2007, 07:14 PM   #5
2stroke
Gone Wild
 
Join Date: Jan 2007
Posts: 382
Default

wait so the 36v batterys will take the 48v?
2stroke is offline   Reply With Quote
Old 05-15-2007, 08:14 PM   #6
Rizzo20
Not Yet Wild
 
Rizzo20's Avatar
 
Join Date: Feb 2007
Location: Washington, PA
Posts: 66
Default

I added two more 6 volt batteries making a total of 48 volts. Now when I charge it, I remove the wires from the last two batteries and charge them on a seperate 12 volt charger.

Nate, I think the G22 cart @ work is marked on the receptacle with a + and - so as long as I wire according to that I should be ok.....I hope. It's a 50/50 shot right?
Rizzo20 is offline   Reply With Quote
Old 05-15-2007, 09:05 PM   #7
roady89
Guest
 
Posts: n/a
Default

Yea...just make sure your polarity is right and you will be fine. + to + and - to -
  Reply With Quote
Old 05-16-2007, 07:51 PM   #8
MuayThai41
Gone Wild
 
MuayThai41's Avatar
 
Join Date: Dec 2006
Location: Irving Texas
Posts: 249
Default

Quote:
Originally Posted by roady89
Yea...just make sure your polarity is right and you will be fine. + to + and - to -
Roady gives this advice form lots of "experience" In other words, the phrase "Owe! That bit me!" is not a rare occurance.

48 volts won't hurt TOO badly.
MuayThai41 is offline   Reply With Quote
Old 05-16-2007, 08:37 PM   #9
gornoman
Stay thirsty my friends!
 
gornoman's Avatar
Mixed Breed
 
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,104
Default

Quote:
Originally Posted by Rizzo20
I added two more 6 volt batteries making a total of 48 volts. Now when I charge it, I remove the wires from the last two batteries and charge them on a seperate 12 volt charger.
This is not necessary if you moved your charger tap like I reccomended. Go prove it to youself with your multimeter!
gornoman is offline   Reply With Quote
Old 05-16-2007, 09:15 PM   #10
Rizzo20
Not Yet Wild
 
Rizzo20's Avatar
 
Join Date: Feb 2007
Location: Washington, PA
Posts: 66
Default

I'm not sure I follow you. Let me see if I got this: you moved the wires from the stock receptacle to a different location (different batts)? So you're sayin' I don't have to pull any wires off at all when using two seperate chargers? My 12 volt charger is a POS. After 14 hours of charging it only took the two new batts to 6.0volts a piece from 5.85. I didn't want to run them that low but they drianed faster than the original 6 since they are fresh I suppose...
Rizzo20 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes



All times are GMT -5. The time now is 01:08 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.