|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
07-22-2015, 09:29 AM | #1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
No Start, Stop Switch Question G22
I just took in a G22 gas cart on a trade that doesn't run. I have started to go through the steps in the sticky and ran across something rather odd. On the stop switch at the accelerator pedal when I checked the brown wire for 12V I got nothing. However, I checked the red wire and got 12V from it (without the pedal being pressed). From looking at the wiring diagram this should not be happening. Outside of the wires somehow being switched around is there anything else that would cause this?
|
07-22-2015, 06:21 PM | #2 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: No Start, Stop Switch Question G22
Quote:
|
|
07-23-2015, 08:47 AM | #3 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
Re: No Start, Stop Switch Question G22
I looked again last night and it is the r/w that I am getting constant 12v on when the key is on. The brown wire I get nothing on.
|
07-23-2015, 08:10 PM | #4 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
Re: No Start, Stop Switch Question G22
|
07-22-2015, 08:16 PM | #5 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: No Start, Stop Switch Question G22
Gee's Block, your signiture speaks volumes!!...
|
07-23-2015, 10:10 PM | #6 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: No Start, Stop Switch Question G22
That's good to here that it's only a 50cent part to get you back going
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
How do I wire start and run with a key instead of pedal start/stop | Gas Club Car | |||
anyway to get rid of stop/start? | Gas Yamaha | |||
G9 Start Stop Switch | Gas Yamaha | |||
Start and stop | Gas Yamaha | |||
Start and stop | Electric EZGO |