|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-09-2015, 12:56 PM | #1 |
Gone Wild
Join Date: Dec 2014
Location: Pompano Beach, FL
Posts: 230
|
FSIP 500a Adjustment
Just curious, what others that have the FSIP 500a controller set the best torque/speed combo?
thanks Gwagon |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2015, 04:43 PM | #2 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,217
|
Re: FSIP 500a Adjustment
the only adjusts are the plugs on the side CL (Connection end ), CA (Middle), PLU ( Far End )
The CA is the only one I have messed with , the other I have left at factory settings Potentiometer Adjustment. The potentiometers are designed to be adjusted with a small trimmer or screwdriver. Current Limit (CL) – Adjust potentiometer CW (clockwise) to increase maximum current limit. The current is adjustable from approximately 50% to 100% of controller rating. Controlled Acceleration (CA) – Adjust potentiometer CW to increase acceleration. The acceleration ramp is adjustable from approximately 0.5 to 5 seconds. The factory setting is 1.2 seconds. Plugging Adjustment (PL) – Adjust potentiometer CW to increase intensity of plugging. Be sure when setting Plugging to make for smooth forward to reverse transition. Plugging current is adjustable from approximately 10% to 100% of specified limit. |
02-09-2015, 06:45 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: FSIP 500a Adjustment
I suggest you try it at the factory settings BEFORE adjusting.
95% of users are happy using it on the factory settings. |
04-07-2015, 04:42 PM | #4 |
Gone Wild
Join Date: Feb 2015
Location: Valdosta ga
Posts: 175
|
Re: FSIP 500a Adjustment
What are yall using to adjust GE 500 amp controller? I have a very small flathead screw driver and can't adjaut anything ? Thanks.
|
04-07-2015, 05:39 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: FSIP 500a Adjustment
It takes a eyeglasses size common screwdriver to adjust. But there is nothing to gain unless you wish to spin the tires on take off, then you can up the acceleration rate but, amps already 100% from factory
|
04-07-2015, 07:36 PM | #6 |
Gone Wild
Join Date: Feb 2015
Location: Valdosta ga
Posts: 175
|
Re: FSIP 500a Adjustment
Ok awesome! Thanks. I purchased package 404b a few weeks ago. Only took about 1.5 hours to install. Just wanted to try different setup! Very impressed thanks!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G19 500a controller upgrade | Electric Yamaha | |||
500A FSIP Cotroller Install In My Precedent | Members Rides | |||
Fs: alltrax 500a for parts | Golf Carts and Parts | |||
Will I see much difference in a 500a from a 400a controller? | Electric EZGO | |||
'02 PDS - do I need a 500A controller? | Electric EZGO |