|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-07-2017, 10:58 AM | #1 |
Not Yet Wild
Join Date: Aug 2017
Posts: 17
|
factory setting for an sr controller
I bought a cart from a guy and he put an sr controller he bought from Scotty b. the first thing I did was hook it up to a laptop and started playing with the adjustments. now I do not know what the correct settings should be because I did not write down the original settings. I am just concerned that how it is set now that I could possibly fry the motor. what should theksi, under voltage and over voltage be set to? Thanks in advance.
sr 48400 200 solonoid 23'' tires 36 volt 2006 ezgo txt |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-07-2017, 12:48 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: factory setting for an sr controller
SR48500 default settings are safe for the factory motor. Avoid a stall situation with any electric motor.
KSI (key switch ignition) 16v Under 20v Over 55v motor amps 500v battery amps 500v forward speed 100% Reverse speed 50% Throttle rate 12.5 % Check Peak amp mode |
09-07-2017, 12:50 PM | #3 | |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,890
|
Re: factory setting for an sr controller
Quote:
EDIT......CRAP......you beat me to it!! |
|
09-07-2017, 12:54 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: factory setting for an sr controller
|
09-07-2017, 04:05 PM | #5 |
Not Yet Wild
Join Date: Aug 2017
Posts: 17
|
Re: factory setting for an sr controller
thank you for the quick replies
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
DCX400 controller max/min voltage setting | Electric Club Car | |||
G2 driven clutch factory spring setting vs stiff spring. | Big Block Talk! | |||
setting 4 on vurtis controller | Electric Club Car | |||
Setting toe on a G-16 | Gas Yamaha | |||
re-setting the obc | Electric Club Car |