|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-07-2017, 02:26 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Location: Ocala Fl
Posts: 55
|
EZGO rxv freedom programer
Where can you rent these to set the speed to LSV mode?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-07-2017, 03:21 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: EZGO rxv freedom programer
What you need first is a Passkey. The passkey unlocks the Freedom mode. The freedom mode gets you 17.5 mph. The programmer is used after the passkey it will get you 19.5 mph. It also lets you increase your acceleration to have faster take offs.
|
09-13-2017, 08:14 AM | #3 |
Not Yet Wild
Join Date: Sep 2017
Location: Ocala Fl
Posts: 55
|
Re: EZGO rxv freedom programer
Thank you. I already get 19.5 so freedom mode is unlocked. Will the programmer give me the lsv speed of 25mph? I have 14" tires on and get 23mph on a flat road. With lsv speed I could get about 28 or 29 which is what I would like. Any ideas?
|
09-13-2017, 08:27 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: EZGO rxv freedom programer
Programmer with freedom mode will get it to 19.5 with 18" tires. With 23s you should be mid twenties.
|
09-13-2017, 10:13 AM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZGO rxv freedom programer
There is no "LSV mode" unlock key, and no legitimate way of changing from a golf cart software to LSV software, without actually getting the software downloaded from a LSV, and dumping it on a Golf cart controller. (Which is likely to cause problems of it's own, 2Five lsv software is setup for a vehicle with 4 wheel disc brakes, not a vehicle with zero wheel brakes). Just dumping LSV software on a golf controller would actually slow you down anyway, 2Five uses different gear ratio.
|
09-13-2017, 11:23 AM | #6 |
Not Yet Wild
Join Date: Sep 2017
Location: Ocala Fl
Posts: 55
|
Re: EZGO rxv freedom programer
Ok thank you. I see that won't work. I will just be happy with what I have for now. I understand from reading that going to 350amp controller won't give you anymore speed.
|
09-13-2017, 03:15 PM | #7 | |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: EZGO rxv freedom programer
Quote:
|
|
09-13-2017, 03:59 PM | #8 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: EZGO rxv freedom programer
Quote:
Bob |
|
09-13-2017, 04:17 PM | #9 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: EZGO rxv freedom programer
Quote:
Remember this... It is the motors capacity to dissipate heat that becomes your limiting factor. E-Z-GO reduces high level performance settings to limit heat buildup in your motor. So, if you increase performance and speed to LSV levels, you must keep your motor temperature in mind. I would recommend installing a motor temperature guage. There is a motor temperature monitor mode in the 1313 handset. I pass through the Ocala area on my way into central FL from time to time, if you want to try tweaking some of those high level parameters. Bob |
|
09-24-2017, 07:59 AM | #10 |
Not Yet Wild
Join Date: Sep 2017
Location: Ocala Fl
Posts: 55
|
Re: EZGO rxv freedom programer
Will tweaking the high end items cause more heat for the motor? Cables all changed out so that should help.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 EZGO RXV Freedom | Electric EZGO | |||
Ezgo 1992 Freedom | Gas EZGO | |||
94 ezgo freedom | Electric EZGO | |||
EZGO Freedom PDS | Electric EZGO |