|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-23-2013, 03:16 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2010
Location: FL
Posts: 9
|
Help - New Controller - still don't GO
Hi - I have a weird one. 2004 PDS EXGO - Don't go. Solenoid and FNR is OK
I had a weird condition were I had 38V to not only the center grey wire of the FNR switch but also the green wire when the switch was in neutral position. I had the Controller rebuilt and now I have 38V is all three wires to the FNR switch?? Still no go. Any suggestions appreciated. Last edited by Richard Ducharme; 05-23-2013 at 03:17 PM.. Reason: error |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
| Replacing a 48V controller with 36v controller | Electric EZGO | |||
| Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
| Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
| Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
Linear Mode
